Search results
Jump to navigation
Jump to search
Page title matches
- #REDIRECT [[Sensors/Current]]29 bytes (3 words) - 03:46, 18 December 2011
- Current sensors can be easily added. .../product/1186 Pololu Current Sensor Carrier] is based on the ACS715 with a current of up to 30A.6 KB (994 words) - 05:57, 3 May 2015
Page text matches
- #REDIRECT [[Sensors/Current]]29 bytes (3 words) - 03:46, 18 December 2011
- *[[Sensors|Sensors]]<br><small>[[GPS]], [[IMU]], [[Sensors/Current|Current]], [[Sensors/Airspeed|Airspeed]], etc.</small>858 bytes (122 words) - 09:04, 20 April 2016
- Current sensors can be easily added. .../product/1186 Pololu Current Sensor Carrier] is based on the ACS715 with a current of up to 30A.6 KB (994 words) - 05:57, 3 May 2015
- *'''roll_adc''' - the current value of the RATE ADC minus the current ''RATE neutral'' value (RATE - neutral)<br/> *'''roll''' - the estimated roll rate of the gyro with the current calibration<br/>6 KB (1,018 words) - 19:17, 9 March 2011
- * [[Lisa/M_v2.0|Lisa/M v2.0 (current) Documentation]]392 bytes (58 words) - 19:15, 2 August 2013
- * (green) The total current (I) consumed by the whole system * (blue) The current (I) going out of the battery.2 KB (376 words) - 08:17, 28 December 2011
- *[[Student_Projects|Student Projects]]<br><small>Some past and current Paparazzi based student projects</small>598 bytes (83 words) - 18:38, 19 January 2016
- == Current Setup and BOM ==3 KB (488 words) - 13:52, 10 March 2011
- == Expected Current Consumptions == Here are some general current guidelines to aid in initial assembly checks.7 KB (1,214 words) - 01:43, 24 May 2011
- == Current Work ==3 KB (386 words) - 00:45, 24 January 2012
- * current version of [http://www.mediawiki.org/wiki/Extension:SyntaxHighlight_GeSHi S2 KB (225 words) - 14:55, 18 December 2013
- * '''Prepend''': add the task before the current element (the current one remains in the list) * '''ReplaceCurrent''': replace the current mission element5 KB (841 words) - 03:38, 9 July 2019
- *'''Weight:''' 400 g (current configuration)1 KB (198 words) - 06:42, 20 September 2011
- ...is2ivy</tt> polls Davis VantagePro/VantagePro2 stations and broadcasts the current weather data (ambient pressure, temperature, wind speed and direction) over ...rel bluetooth weather meters (tested with Kestrel 4500) and broadcasts the current weather data (ambient pressure, temperature, wind speed and direction, rela3 KB (462 words) - 07:56, 24 January 2013
- This page is a collection of past and current Paparazzi based student projects.1,003 bytes (153 words) - 03:44, 28 November 2017
- uint8_t nbfdin=0,nbmax=0,current=0; stream_t *ptr = &streams[current];7 KB (924 words) - 07:20, 31 July 2020
- ...if no GPS was available. The .log file will be re-created either from the current configuration (if still in existence) or the MD5-labeled files that are sto3 KB (487 words) - 11:31, 2 February 2014
- -no_md5_check Disable safety matching of live and current configurations 3. current route3 KB (474 words) - 10:27, 17 July 2015
- ...ht-click also gives a popup menu containing the allowed attributes for the current element.2 KB (345 words) - 19:04, 9 March 2011
- ...ign enables to timely detect & adjust parameters such as low voltage, over current, throttle loss signal, motor lock and short circuit etc. thus prolonging th * Max Continuous Current: 40A8 KB (1,220 words) - 10:18, 31 December 2019
- <p>Booz is an extension of Paparazzi to VTOLs. At the current stage of the project, the system provides attitude stabilization, vertical <p>The current avionics consist of 3 boards</p>5 KB (829 words) - 16:53, 20 June 2012
- # The current control loops are all implementing the same "API", which makes it easy to r ...uate the "select" conditions for all modes (until one is valid, or stay in current mode)9 KB (1,407 words) - 06:18, 15 May 2018
- New Gaia is an update of the current gaia agent. ...the user to add elements of a realistic meteorological environment to the current simulation thanks to an adapted GUI. The initial version of the program pro6 KB (952 words) - 14:41, 22 November 2018
- ...e (from the SRTM model ... if the file is available in data/SRTM) from the current altitude ...s are still set to the 50m above sea level, so they will be -15m from your current altitude...8 KB (1,294 words) - 06:59, 21 September 2015
- A permanent branch where current the development is based on. For users wanting to test the the bleeding edg2 KB (377 words) - 06:53, 23 April 2015
- My current plan is to base the cape on Lisa/M, rework supply and connectors. * I want to investigate autonomous soaring. F4 runs the current fixedwing code. BBB runs the autonomous soaring program written in Python/N6 KB (1,005 words) - 12:51, 29 April 2014
- ...ADC inputs on power port which are designed to monitor battery voltage and current. Note that there are no voltage divider on those inputs, so external power ...current draw of modem together with Lisa LC does not exceed the max output current of LDO (which is 500mA).6 KB (1,043 words) - 09:26, 20 January 2016
- Some stabilization modules require an estimation of the current actuator states. Examples are the [[Working with INDI|INDI]] and INCA modul ...osition (<math>\delta_{est}</math>) can be calculated as a function of the current actuator command (<math>\delta</math>) and the previous estimation of its p9 KB (1,386 words) - 16:22, 24 October 2020
- ...the [[Conf.xml]] file. A new aircraft can be added from the A/C menu. The current aircraft can be deleted from the A/C menu. ...setting the check box (left side of the Stop/Redo button). The set of the current processes can be saved as a user ''session'' (actually in the <tt>conf/cont6 KB (975 words) - 19:02, 31 July 2020
- * Up to 1,5A load current on 3,3V line * Up to 5A load current on 5V line5 KB (839 words) - 09:20, 21 February 2017
- * [[Lisa/M_v2.0|Lisa/M v2.0 (current) Documentation]] ** Additional sensors for measuring airspeed, current, etc. would enhance a fixed-wing airframe.5 KB (838 words) - 08:51, 7 January 2016
- == Current status ==9 KB (1,342 words) - 15:12, 14 April 2017
- ...yDuino: DO NOT TEST IT WHILE CONNECTED TO A LAB POWER SUPPLY ! The reverse current generated will damage the power supply or burn the Autopilot immediately. ...e multicopter response (but NOT where soft start or really any significant current limiting is needed!)6 KB (824 words) - 09:00, 28 March 2018
- * Built-in Current meter Max 28A ...gn is not shared sadly by de original manufacturer of the PCB. However the current boardfile explains a bit of which pin goes where.4 KB (711 words) - 13:32, 18 December 2019
- You might have to kill your current speech-dispatcher for the changes to take effect.3 KB (367 words) - 03:27, 28 November 2017
- Current sensor : ADC3 (ie ADC1)3 KB (460 words) - 06:39, 20 September 2011
- Starts all propellers. The propellers will not start when the current error is not cleared. Motors ramp together, spin together, stop together. I * The second uint4 indicates the current state of the system state machine.7 KB (1,000 words) - 18:17, 5 February 2015
- ...ng of the orientation. This idea is good one but it should not replace the current pfd but rather be an option to use in the gcs. ('''NOTE:''' Already possibl #* ('''NOTE:''' Possible by adding for example a module that ''grabs'' current coordinates at e.g. .1 Hz and if in flightplan <while cond="!GpsFixValid()"13 KB (2,106 words) - 20:22, 28 April 2013
- * use a power supply for first tests, not a battery, limit the current to about 100mA, use a voltage of about 5V * the 5V should not drop due to current limiting, measure the 3.7V and the 3.3V supply on the board9 KB (1,486 words) - 16:38, 12 March 2012
- As of December 2006, all current autopilot code is still backward compatible but some advanced functions suc2 KB (361 words) - 19:40, 1 March 2012
- * 1 power switch with current limiter2 KB (355 words) - 07:50, 2 March 2012
- ...part of the GCS displays the flight plan in a tree view. You see that the current flight plan is composed of several ''blocks'': ...flight plan anywhere in the world, by translating the waypoints around the current location of aircraft as soon as it is reported by the GPS.12 KB (1,968 words) - 02:00, 6 February 2018
- |Current Measurement ||YES ||NO ||NO||3 KB (405 words) - 04:56, 7 June 2014
- ...a lot like C++. More info [http://en.wikipedia.org/wiki/Arduino here]. The current arduplane code is not particularly easy to read or modify due to the way it ...ys a customizable Map displaying waypoints, flight data/telemetry and even current code blocks being executed in one easy to navigate screen. All telemetry me11 KB (1,738 words) - 01:06, 17 August 2012
- * JP1 current consumption of the MCU can be measured here2 KB (404 words) - 04:50, 31 May 2014
- ...if no GPS was available. The .log file will be re-created either from the current configuration (if still in existence) or the MD5-labeled files that are sto7 KB (1,154 words) - 10:54, 29 July 2020
- <span style="color:red">Not used with current Paparazzi Versions anymore.</span>5 KB (771 words) - 02:06, 1 April 2011
- ==== Calibrating for Current ==== ...to have. Luckily we can compensate for this unwanted side-effect by adding current compensation values to the airframe file. This calibration is mainly intere18 KB (3,068 words) - 12:50, 26 March 2023
- * Up to 2.5A load current on 5V line The internal switch TPS2051B is designed to withstand 500mA continuous current and is '''short-circuit and thermally protected'''.<br>9 KB (1,343 words) - 08:46, 17 July 2015
- |v2.2(current)||09/2012||2nd Gen Revision '''Note:''' Aspirin 2.1 comes in several population versions. The current version available at http://transition-robotics.com has the MPU-6000, HMC588 KB (1,168 words) - 09:58, 11 July 2017
- ...ll enable access to the X-Server, USB devices and audio and set mount your current Paparazzi directory in the home directory of the pprz user inside the conta4 KB (629 words) - 04:09, 10 March 2016
- (gdb) where – obtain a backtrace showing all function calls before the current statement ...inside gdb. Calling make from the gdb command line will call make in your current directory:7 KB (1,208 words) - 04:31, 14 April 2015
- *maximum current usable by both Tawaki and payload on the +5V: I(5V)<4A *maximum current usable for payload on the +3.3V: I(3.3V)<3A20 KB (2,960 words) - 08:28, 19 January 2021
- *maximum current usable by both Tawaki and payload on the +5V: I(5V)<4A *maximum current usable for payload on the +3.3V: I(3.3V)<3A20 KB (2,970 words) - 06:03, 20 January 2021
- ...esigns however using the old designs it is possible to implement. With the current low prices of a simple video transmitter, data over audio may come in as a10 KB (1,530 words) - 09:12, 25 September 2019
- ! Name !! Location !! Hardware !! Joined !! Current activities / project status ! Name !! Location !! Hardware !! Joined !! Current activities / project status20 KB (2,751 words) - 15:52, 5 January 2016
- ...l tree of the flight plan is given in this page. The current block and the current stage are highlighted. A double-click on a block allows the operator to imm ...Also note, clicking on the current value will send a request to obtain the current value from the aircraft.21 KB (3,438 words) - 04:20, 15 October 2021
- ...a greater problem, namely, a reaction rate that is simply too slow; If the current state refreshes too slowly, naturally, the drone will react slowly and in m3 KB (502 words) - 05:46, 21 January 2013
- ...will save the visible region (with waypoints, tracks, ...if any, under the current zoom), the latter will stich together the original Google tiles covering th You will read a -15m AGL during the first seconds but it won't stop. The current threshold for crash detection is -3m (sw/simulator/flightModel.ml:178 an aw9 KB (1,495 words) - 15:28, 19 August 2013
- ...tt>MILLIAMP_AT_FULL_THROTTLE</tt></b> value by 20% to match your in-flight current consumption. This tweaking is most precise if you fly full throttle only (r ...added to tweak the energy estimation for non full throttle cruise. As the current consumption is nonlinear, at 50% throttle it is likely to be substantially23 KB (3,614 words) - 07:34, 24 September 2018
- ...simplified quadrotor model and the estimation of an external force. In the current proof-of-concept, only the external force in the body z-axis is used for th In the current version of this module, the RL agent is stored on the ground station. As su13 KB (2,008 words) - 03:58, 13 May 2019
- ...vertical control is specified with various attributes of these stages. The current available navigation stages are Element <tt>attitude</tt> is the navigation mode which corresponds to the current lowest control loop for horizontal mode.37 KB (5,935 words) - 16:08, 4 May 2021
- * Rated current: 1000mA3 KB (485 words) - 09:41, 5 November 2020
- At the current state of the code only '''UART1''' goes to '''UART2''' and Vice versa and i5 KB (777 words) - 12:46, 22 November 2017
- For current Paparazzi versions (v5.0 and above) the [https://launchpad.net/gcc-arm-embe Current Debian ('''jessie''') and Ubuntu (14.04 '''trusty''' and later) releases ha12 KB (1,720 words) - 10:55, 5 February 2020
- * Pierre will build an adapter board between his current dev board and gumstix connector ...customize a design or build one of the "released" designs. In summary, the current things folks are building and using are:18 KB (2,964 words) - 08:13, 29 March 2011
- '''v5.6 has not been released yet, this refers to the current release candidates v5.5.x_testing'''7 KB (1,021 words) - 15:18, 15 July 2015
- Check if the transmitter uses obsolete firmware version in comparison to the current firmware version available.5 KB (775 words) - 12:44, 10 August 2014
- // goto to a position relative to current position and heading in meters # goto to a position relative to current position and heading in meters22 KB (3,098 words) - 07:58, 31 July 2020
- ...the base station are used in order to derive the propagation errors at the current location. The errors are then send to the 'rover station' in order to impro ...change the settings in the U-center, probably the receiver is polling the current setting to often. Turn off auto-poll with the buttons on the bottom left co11 KB (1,894 words) - 02:27, 11 March 2020
- This setting only applies to your current Bash session. If you close the window, Bash will forget it. You’ll have t6 KB (944 words) - 05:19, 26 April 2022
- ...itself stored in the associated <tt>.log</tt> file. It may differ from the current one installed in your <tt>conf/</tt> folder.6 KB (997 words) - 07:35, 28 November 2017
- ...erstand all current modules and their capabilities. After you investigated current modules and came to the conclusion, there is no way to solve you flightplan18 KB (2,811 words) - 05:10, 18 June 2019
- ** Others: [[Sensors/Current|current]], sonar, etc. * current (energy consumption)20 KB (2,973 words) - 13:22, 22 January 2018
- * 2 Analog inputs for system battery voltage and current measurement6 KB (918 words) - 17:14, 16 August 2016
- At the current state of Paparazzi code (20180206), most of the modules that depend on ''vi6 KB (1,028 words) - 09:59, 3 December 2021
- ...nless you know what are you doing) and 15-25A ESCs depending on your motor current consumption.5 KB (824 words) - 08:22, 28 May 2016
- =Current Tasks and Priorities=8 KB (1,235 words) - 06:35, 20 May 2011
- It has auto-baudrate to detect the current GPS baudrate, and configures all message rates and communication ports. The7 KB (998 words) - 10:40, 10 October 2015
- ** you get the current baudrate code: '3' ** you get the current baudrate code: '3'14 KB (2,338 words) - 11:48, 8 February 2017
- ...cooling. Be careful using high power or digital servos consuming a lot of current. If you use four or more of them on your airframe it is recommended to supp ...D'''erivative ('''PD''') feedback loop. The derivative term considers the current speed and direction of the servo as well as the speed and direction of the19 KB (3,106 words) - 13:57, 1 May 2016
- # UBX->CFG->CFG : '''save current config''', click '''"send"''' in the lower left corner to permanently save # UBX->CFG->CFG : '''save current config''', click '''"send"''' in the lower left corner to permanently save25 KB (4,051 words) - 09:29, 5 July 2020
- ...e to 0 will make application to wait for user confirmation before changing current block.7 KB (1,071 words) - 22:05, 23 April 2015
- ** Onboard 5V, provided total current (autopilot + external 5V modules + servos) does not exceed 3A. The internal switch TPS2051B is designed to withstand 500mA continuous current and is '''short-circuit and thermally protected'''.<br>28 KB (4,158 words) - 02:41, 12 April 2018
- ...tatus of the aircraft such as location, altitude, airspeed, battery level, current flight block, and much more to be monitored in real time. Communication fro ...s of the link (just like the main Link status indicator in the strip), the current ping time, and the rate of received messages. So if one link is lost, it's18 KB (3,117 words) - 09:33, 30 June 2016
- * The current firmware does not implement a full rotation matrix calculation and instead7 KB (1,084 words) - 07:45, 1 November 2012
- * Whether the current code is APM, PX4 or Paparazzi, the flashing steps remain the same.8 KB (1,278 words) - 01:53, 18 December 2019
- When limiting the current via a power supply, ampere ratings shouldn't be too important as long as it7 KB (1,142 words) - 16:01, 17 May 2014
- # additional functionality in qwip will require recoding much of the current ocaml ground station logic in c, which isn't the easiest language for proce6 KB (860 words) - 02:33, 15 July 2013
- ...be run with an HTTP server which can be used to obtain screenshots of the current scenery in FlightGear. There is a limit to the rate at which these screensh8 KB (1,267 words) - 07:09, 8 November 2018
- |v1.00 (current)||04/2014||Initial release6 KB (934 words) - 03:36, 24 June 2015
- * Current consumption: 300mA(type)6 KB (872 words) - 11:57, 19 December 2019
- ** define : each define node specifies a CFLAGS for the current targets10 KB (1,641 words) - 15:23, 17 June 2016
- ...nt to retrace our steps you can simply download it and access it from your current operating system using virtual box. A small tutorial can be found [[ Virtua8 KB (1,237 words) - 05:03, 28 November 2017
- ...people are playing, the AR.Drone can be used as a tool to live-stream the current game to a beamer for everyone to see. Games could also be taped and watched7 KB (1,178 words) - 04:30, 28 November 2017
- * Current: 1.0A9 KB (1,348 words) - 09:00, 7 January 2016
- Most are compatible with the current STM32 platform, some are also compatible with the older LPC 21xx.8 KB (1,238 words) - 05:32, 28 November 2017
- ...9, 2007. The new design is not a bug-fix as no known flaws exist with the current 0.99 and 1.1 versions, so the redesign is performance, easy to use and easy ...systems. Be careful using high power or digital servos consuming a lot of current. If you use four or more of them on your airframe it is recommended to supp23 KB (3,563 words) - 05:42, 28 September 2013
- ...CS may yield unpredictable results. These things should work better in the current version.13 KB (2,293 words) - 14:36, 10 March 2011
- Image:Minimav.jpg| <b>FJ1</b><br>The PPZUAV current project/ MAV 420mm / 85g8 KB (1,247 words) - 12:38, 2 September 2014
- ...[[Get_Hardware|get hardware]] section for a source of these parts. In the current version of the SUMO we use the Umarim Lite v2 autopilot, a TWOG board as da7 KB (1,025 words) - 15:51, 19 December 2019
- '''(Feb. 1, 2014) Current OS X limitations:''' ...es that might work on older OS X versions but are known not to work on the current Mac OS X. They all can be found on the [[Installation/MacOSX-legacy]] page.18 KB (2,727 words) - 08:24, 25 February 2019
- ...timate the control effectiveness values online. It does this by taking the current estimate of the control effectiveness multiplied with the most recent chang13 KB (1,966 words) - 16:24, 24 October 2020
- In the current stage we achieved full duplex SPI communication between the Overo and the S15 KB (2,331 words) - 05:44, 12 October 2011
- The current airborne sourcecode has gone a little bit out of control. Everyone was work10 KB (1,520 words) - 11:16, 18 March 2013
- # Mission Planner checks whether the area can be surveyed with the current resources (remaining battery, flight speed, ...)12 KB (1,845 words) - 13:57, 27 November 2017
- Zero roll/pitch and current heading setpoint (so hover in attitude mode but not position controlled) an11 KB (1,873 words) - 16:29, 30 April 2015
- |v1.00 (current)||08/2010||0603/TSSOP PCB design9 KB (1,393 words) - 11:55, 14 December 2012
- |JP1||JP1||Switch||MCU Current can be measured here12 KB (1,840 words) - 13:21, 3 May 2015
- <li>Power on (~5v to 12v current limited power supply suggested)10 KB (1,470 words) - 18:43, 1 April 2012
- ...g in potential thermal shutdown while in flight. Depending on the expected current draw, it is best to power this regulator with a lower voltage. 5V is the pe ...f, for example, one is using an external 5V regulated supply, and a higher current is needed. Unless external use of 5V is required on the ANALOG1 and ANALOG239 KB (6,235 words) - 06:23, 21 February 2020
- This will only be active in the current terminal session. If you wish to manually modify the path permanently, you19 KB (3,014 words) - 09:55, 10 June 2016
- |1||TPS2051BDBV||TPS2051B||IC4||Current Limited Power Distribution Switch||Texas Instr.||SOT23-5||''yes''||296-212615 KB (2,149 words) - 09:46, 2 March 2012
- ...gpio's used for servos burnt through when connected directly to servos. - Current solution: resistors (Esden)</strike>13 KB (2,118 words) - 11:16, 18 March 2013
- The internal switch TPS2051B is designed to withstand 500mA continuous current and is '''short-circuit and thermally protected'''.<br>16 KB (2,357 words) - 07:22, 2 August 2018
- ...g in potential thermal shutdown while in flight. Depending on the expected current draw, it is best to power this regulator with a lower voltage. 5V is the pe19 KB (2,935 words) - 19:15, 2 August 2013
- To use the driver in current firmware OTG serving should be off. [[use_the_USB_port_on_Parrot_Drones|Tak14 KB (2,164 words) - 11:25, 28 September 2022
- Replace the current AR.Drone 2.0 brain by uploading paparazzi in current ARM chip and use the aready available sensors. Connect a GPS on the USB por66 KB (9,457 words) - 06:23, 8 September 2017
- ...e C stands for '''C'''ombined, the PPM sum stream output, supported on all current autopilot boards,27 KB (4,532 words) - 03:05, 3 August 2017
- * XBee (PRO) ZB (the current series)40 KB (6,196 words) - 00:53, 21 January 2021
- ...rms showing innovative keynotes of pioneers in the industry as well as the current state-of-the-art presented by many researchers working on MAV's. The schedu44 KB (7,078 words) - 08:21, 8 January 2016