From PaparazziUAV
(Redirected from HB v1)
Jump to navigation Jump to search

HB_Autopilot Solutions

HB-Autopilot V1.0

The HB_Autopilot V1.0 hardware was built in Bremen based on Tiny 1.3 and Tiny 2.2 hardware. It uses like booz a mcu and sensor pcb. The sensor pcb has same extensions to the booz pcb: temperature sensor pressure sensor with 24Bit ADC and difference pressure sensor. It can be used for a fixed wing aircraft or work with quadrocopters or helicopters.

Source: http://www.akaflieg.hs-bremen.de Andreas Dei Report: http://www.akaflieg.hs-bremen.de/download/HB-Autopilot.pdf

HB_Autopilot Images

Detailed Images

Block Architecture

Block Schematic.jpg

Hardware Source Files

Hardware- and software- files can be found here: (server down, only on request.)

Bill Of Material

For now you can see the BOM from Hardware Source Files.


Team staff:

   Heinrich Warmers  hwarmers at hs-bremen.de
   Oliver Riesener   oliver.riesener at hs-bremen.de

Student work:

   Andreas Dei       andreas.dei at gmx.de    
   Thu Nguyen
   Christoph Niemann
   Henning Sauerland
   Malte Lorbach
   Arthur Neumann
   Johannes Behn

Authors of external sources:

   R O SoftWare
   Michael Walter
   Ralf Corsepius