Difference between revisions of "Elle0"
Jump to navigation
Jump to search
| Line 33: | Line 33: | ||
= Mechanical drawings = | = Mechanical drawings = | ||
[[Image:Elle0-top-mechanical.png|900px]] | |||
= Schematic = | = Schematic = | ||
Revision as of 18:11, 28 November 2015
Elle0 is a low cost STM32F4 based autopilot. It was developed by 1BitSquared specifically to work with the Paparazzi UAV framework.
Features
- STM32F4 168MHz ARM Cortex-M4 microcontroller with FPU
- 1 Mbyte of Flash memory
- 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
- Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1), and HMAC
- True random number generator
- 3 axis gyroscope (connected over SPI for high speed sampling and low latency)
- 3 axis accelerometer (connected over SPI for high speed sampling and low latency)
- 3 axis magnetometer (connected over SPI for high speed sampling and low latency)
- barometer (connected over dedicated SPI for low noise operation and low latency)
- 1 I2C auxilary sensor connection
- 2 TTL level serial ports for telemetry radio and GPS
- 2 serial input interfaces for remote control receivers (using Spektrum compatible JST connectors)
- 1 USB port for easy firmware upgrade
- 8 PWM outputs/inputs for servos or legacy PPM RC receivers
- 2 Analog inputs for system battery voltage and current measurement
- CAN TX and RX lines are accessible
Elle0 V1.2 top view
Elle0 V1.2 bottom view
Pinout
Mechanical drawings
Schematic
System setup examples
Where to Buy
Elle0 is available for Pre-Order at the 1BitSquared store. It will be available early 2016.