Search results
Jump to navigation
Jump to search
Page title matches
- #REDIRECT [[Sensors/Current]]29 bytes (3 words) - 03:46, 18 December 2011
- Current sensors can be easily added. .../product/1186 Pololu Current Sensor Carrier] is based on the ACS715 with a current of up to 30A.6 KB (994 words) - 05:57, 3 May 2015
Page text matches
- #REDIRECT [[Sensors/Current]]29 bytes (3 words) - 03:46, 18 December 2011
- *[[Sensors|Sensors]]<br><small>[[GPS]], [[IMU]], [[Sensors/Current|Current]], [[Sensors/Airspeed|Airspeed]], etc.</small>858 bytes (122 words) - 09:04, 20 April 2016
- Current sensors can be easily added. .../product/1186 Pololu Current Sensor Carrier] is based on the ACS715 with a current of up to 30A.6 KB (994 words) - 05:57, 3 May 2015
- *'''roll_adc''' - the current value of the RATE ADC minus the current ''RATE neutral'' value (RATE - neutral)<br/> *'''roll''' - the estimated roll rate of the gyro with the current calibration<br/>6 KB (1,018 words) - 19:17, 9 March 2011
- * [[Lisa/M_v2.0|Lisa/M v2.0 (current) Documentation]]392 bytes (58 words) - 19:15, 2 August 2013
- * (green) The total current (I) consumed by the whole system * (blue) The current (I) going out of the battery.2 KB (376 words) - 08:17, 28 December 2011
- *[[Student_Projects|Student Projects]]<br><small>Some past and current Paparazzi based student projects</small>598 bytes (83 words) - 18:38, 19 January 2016
- == Current Setup and BOM ==3 KB (488 words) - 13:52, 10 March 2011
- == Expected Current Consumptions == Here are some general current guidelines to aid in initial assembly checks.7 KB (1,214 words) - 01:43, 24 May 2011
- == Current Work ==3 KB (386 words) - 00:45, 24 January 2012
- * current version of [http://www.mediawiki.org/wiki/Extension:SyntaxHighlight_GeSHi S2 KB (225 words) - 14:55, 18 December 2013
- * '''Prepend''': add the task before the current element (the current one remains in the list) * '''ReplaceCurrent''': replace the current mission element5 KB (841 words) - 03:38, 9 July 2019
- *'''Weight:''' 400 g (current configuration)1 KB (198 words) - 06:42, 20 September 2011
- ...is2ivy</tt> polls Davis VantagePro/VantagePro2 stations and broadcasts the current weather data (ambient pressure, temperature, wind speed and direction) over ...rel bluetooth weather meters (tested with Kestrel 4500) and broadcasts the current weather data (ambient pressure, temperature, wind speed and direction, rela3 KB (462 words) - 07:56, 24 January 2013
- This page is a collection of past and current Paparazzi based student projects.1,003 bytes (153 words) - 03:44, 28 November 2017
- uint8_t nbfdin=0,nbmax=0,current=0; stream_t *ptr = &streams[current];7 KB (924 words) - 07:20, 31 July 2020
- ...if no GPS was available. The .log file will be re-created either from the current configuration (if still in existence) or the MD5-labeled files that are sto3 KB (487 words) - 11:31, 2 February 2014
- -no_md5_check Disable safety matching of live and current configurations 3. current route3 KB (474 words) - 10:27, 17 July 2015
- ...ht-click also gives a popup menu containing the allowed attributes for the current element.2 KB (345 words) - 19:04, 9 March 2011
- ...ign enables to timely detect & adjust parameters such as low voltage, over current, throttle loss signal, motor lock and short circuit etc. thus prolonging th * Max Continuous Current: 40A8 KB (1,220 words) - 10:18, 31 December 2019
- <p>Booz is an extension of Paparazzi to VTOLs. At the current stage of the project, the system provides attitude stabilization, vertical <p>The current avionics consist of 3 boards</p>5 KB (829 words) - 16:53, 20 June 2012
- # The current control loops are all implementing the same "API", which makes it easy to r ...uate the "select" conditions for all modes (until one is valid, or stay in current mode)9 KB (1,407 words) - 06:18, 15 May 2018
- New Gaia is an update of the current gaia agent. ...the user to add elements of a realistic meteorological environment to the current simulation thanks to an adapted GUI. The initial version of the program pro6 KB (952 words) - 14:41, 22 November 2018
- ...e (from the SRTM model ... if the file is available in data/SRTM) from the current altitude ...s are still set to the 50m above sea level, so they will be -15m from your current altitude...8 KB (1,294 words) - 06:59, 21 September 2015
- A permanent branch where current the development is based on. For users wanting to test the the bleeding edg2 KB (377 words) - 06:53, 23 April 2015
- My current plan is to base the cape on Lisa/M, rework supply and connectors. * I want to investigate autonomous soaring. F4 runs the current fixedwing code. BBB runs the autonomous soaring program written in Python/N6 KB (1,005 words) - 12:51, 29 April 2014
- ...ADC inputs on power port which are designed to monitor battery voltage and current. Note that there are no voltage divider on those inputs, so external power ...current draw of modem together with Lisa LC does not exceed the max output current of LDO (which is 500mA).6 KB (1,043 words) - 09:26, 20 January 2016
- Some stabilization modules require an estimation of the current actuator states. Examples are the [[Working with INDI|INDI]] and INCA modul ...osition (<math>\delta_{est}</math>) can be calculated as a function of the current actuator command (<math>\delta</math>) and the previous estimation of its p9 KB (1,386 words) - 16:22, 24 October 2020
- ...the [[Conf.xml]] file. A new aircraft can be added from the A/C menu. The current aircraft can be deleted from the A/C menu. ...setting the check box (left side of the Stop/Redo button). The set of the current processes can be saved as a user ''session'' (actually in the <tt>conf/cont6 KB (975 words) - 19:02, 31 July 2020
- * Up to 1,5A load current on 3,3V line * Up to 5A load current on 5V line5 KB (839 words) - 09:20, 21 February 2017
- * [[Lisa/M_v2.0|Lisa/M v2.0 (current) Documentation]] ** Additional sensors for measuring airspeed, current, etc. would enhance a fixed-wing airframe.5 KB (838 words) - 08:51, 7 January 2016
- == Current status ==9 KB (1,342 words) - 15:12, 14 April 2017
- ...yDuino: DO NOT TEST IT WHILE CONNECTED TO A LAB POWER SUPPLY ! The reverse current generated will damage the power supply or burn the Autopilot immediately. ...e multicopter response (but NOT where soft start or really any significant current limiting is needed!)6 KB (824 words) - 09:00, 28 March 2018
- * Built-in Current meter Max 28A ...gn is not shared sadly by de original manufacturer of the PCB. However the current boardfile explains a bit of which pin goes where.4 KB (711 words) - 13:32, 18 December 2019
- You might have to kill your current speech-dispatcher for the changes to take effect.3 KB (367 words) - 03:27, 28 November 2017
- Current sensor : ADC3 (ie ADC1)3 KB (460 words) - 06:39, 20 September 2011
- Starts all propellers. The propellers will not start when the current error is not cleared. Motors ramp together, spin together, stop together. I * The second uint4 indicates the current state of the system state machine.7 KB (1,000 words) - 18:17, 5 February 2015
- ...ng of the orientation. This idea is good one but it should not replace the current pfd but rather be an option to use in the gcs. ('''NOTE:''' Already possibl #* ('''NOTE:''' Possible by adding for example a module that ''grabs'' current coordinates at e.g. .1 Hz and if in flightplan <while cond="!GpsFixValid()"13 KB (2,106 words) - 20:22, 28 April 2013
- * use a power supply for first tests, not a battery, limit the current to about 100mA, use a voltage of about 5V * the 5V should not drop due to current limiting, measure the 3.7V and the 3.3V supply on the board9 KB (1,486 words) - 16:38, 12 March 2012
- As of December 2006, all current autopilot code is still backward compatible but some advanced functions suc2 KB (361 words) - 19:40, 1 March 2012
- * 1 power switch with current limiter2 KB (355 words) - 07:50, 2 March 2012
- ...part of the GCS displays the flight plan in a tree view. You see that the current flight plan is composed of several ''blocks'': ...flight plan anywhere in the world, by translating the waypoints around the current location of aircraft as soon as it is reported by the GPS.12 KB (1,968 words) - 02:00, 6 February 2018
- |Current Measurement ||YES ||NO ||NO||3 KB (405 words) - 04:56, 7 June 2014
- ...a lot like C++. More info [http://en.wikipedia.org/wiki/Arduino here]. The current arduplane code is not particularly easy to read or modify due to the way it ...ys a customizable Map displaying waypoints, flight data/telemetry and even current code blocks being executed in one easy to navigate screen. All telemetry me11 KB (1,738 words) - 01:06, 17 August 2012
- * JP1 current consumption of the MCU can be measured here2 KB (404 words) - 04:50, 31 May 2014
- ...if no GPS was available. The .log file will be re-created either from the current configuration (if still in existence) or the MD5-labeled files that are sto7 KB (1,154 words) - 10:54, 29 July 2020
- <span style="color:red">Not used with current Paparazzi Versions anymore.</span>5 KB (771 words) - 02:06, 1 April 2011
- ==== Calibrating for Current ==== ...to have. Luckily we can compensate for this unwanted side-effect by adding current compensation values to the airframe file. This calibration is mainly intere18 KB (3,068 words) - 12:50, 26 March 2023
- * Up to 2.5A load current on 5V line The internal switch TPS2051B is designed to withstand 500mA continuous current and is '''short-circuit and thermally protected'''.<br>9 KB (1,343 words) - 08:46, 17 July 2015
- |v2.2(current)||09/2012||2nd Gen Revision '''Note:''' Aspirin 2.1 comes in several population versions. The current version available at http://transition-robotics.com has the MPU-6000, HMC588 KB (1,168 words) - 09:58, 11 July 2017