The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

LISTS

Links

[[1]]

Paul's Links
1	2	3	4	5
Community_Flight_Log_Archive	Paul_Cox_Activity_Log	User:PaulCox	Lisa_Logitech_Camera	Rt3070usb
ArduIMU	Laserhawk	x	x	x

TODO

SPRING 2011 TODO LIST
Num	Name	Notes	Priority	Status
1	build virtual world scan in hoku2gdhe	x	x	In progress
2	Install MTi-G driver on laptop	MTIHardTest -v <params> >> out.txt stores to disk	x	Done
3	Get test scans from rooftop	one night scan acquired. need day scans and higher scans (and faster)	x	In progress
4	Design MIPI/I2C camera board	sketches ready, Pierre doing orcad and ordering	x	In progress
5	Design/Build hokuyo/MTIG box/mounting cage	Build at Bertrand's place or ENAC	x	Not started
6	Get openembedded running on laptop	laptop too slow	x	Waiting for new PC
x	x	x	x	x

PERSO TODO

PERSONAL TODO LIST
Num	Name	Notes	Priority	Status
1	Get minimag flying	tuneup done, need some glue then ready for maiden	Paulcox 10:33, 17 February 2011 (CET)	In progress
2	Slowstick flying	First arduimu flights done, issues due to auto2 probably due to flight plan altitues, need to study logs	x	In progress
3	Flash ardupimu and get ap compiling	methodology posted on ArduIMU page	x	Done
4	Test xbeepro868 performance	XCTU loopback at 9600 shows 80-90%, with basic telemetry was seeing huge (10-15 sec) delay (was looking at attitude messages), short flights at 57600 ok so far	x	In progress
5	Test loss of IR contrast	works in simulation, need to test in real	x	In progress
6	Adjust Beth opamp gains	for increased precision	x	Do it slacker
7	Try Web-based GCS	qwip checked in, need to try pow	x	In progress
8	Improve altitude control loop	issue with hard boundary between PI and constant regions	x	x
9	Some camera stabilization	Read gimbal servo positions via pot tap to ADC	x	x
10	Try then document item drop capability	one of the checked in enac flight plans does this	x	not started
11	Paparazzi Documentation	Started outlining here	x	Stalled
12	try pan/tilt code	x	x	no started
13	get log archive ready	x	x	In progress
14	redo joystick control setup	look at chris' stuff he send	x	Not started
15	potentially merge tiny/overo i2c com code from tobias	x	x	In progress

BUY BUY BUY

WISH LIST
Num	Name	Notes	Price	Status
1	RC Transmitter (PPM and 2.4GHz)	x	x	x
2	Overo Camera	x	x	x
3	Lisa board	x	x	x
4	I2C motor controllers	need 4 to finish quad	x	x
5	New laptop	x	x	Keep dreaming
6	XBeePro868	Need a third one to test point to multi-point	x	x
7	RazorIMU	For testing	x	x
8	Minimag	x	x	x
9	x	x	x	x

IDEAS

IDEA LIST
Num	Name	Notes	Priority	Status
1	x	x	x	x
2	x	x	x	x
3	x	x	x	x

Random Notes

ubuntu packages

Utilities

sudo apt-get install medit gtkterm git-core ssh apt-file vim

paparazzi

sudo apt-get install paparazzi-dev paparazzi-stm32 paparazzi-arm7 paparazzi-omap  libmpfr1ldbl

perl modules

sudo apt-get install libstatistics-descriptive-perl libgd-gd2-perl libgeo-coordinates-utm-perl \
  libhtml-template-perl libxml-twig-perl libdigest-hmac-perl libdigest-sha1-perl libdigest-md5-file-perl
  wget http://search.cpan.org/CPAN/authors/id/M/MA/MAHEX/Image-Grab-1.4.2.tar.gz

CGI webserver

sudo apt-get install boa

openrobots

sudo apt-get install libbz2-dev pax cmake automake autoconf doxygen libgl1-mesa-dev \
  libglu1-mesa-dev tcl-dev tk-dev libjpeg-dev libxpm-dev swig libxmu-dev libxt-dev libxt6 libxt-dev \
  tcl-dev tk-dev libbz2-dev freeglut3-dev qtcreator libtiff-dev libraw1394-dev libeigen2-dev libdc1394-22-dev

Create file ~/.ssh/config

Host *.laas.fr
User pdcox

Using a joystick to control twog servo

PC-side configuration

On the PC side we will send actuator commands two different ways:

1. Running an ocaml application that listens to the joystick device and using a configuration file, will send ivy messages that get forwarded to the vehicle by the server.

2. Normal paparazzi settings mechanism (using settings dialog from paparazzi center running on PC) that sets corresponding variables on the vehicle.

Running the joystick test program you can see which buttons do what: (Note you have to run a make in the directory first to compile everything)

~/paparazzi3/trunk/sw/ground_segment/joystick$ ./test_stick 
Available button: 288 (0x120)
Available button: 289 (0x121)
Available button: 290 (0x122)
Available button: 291 (0x123)
Available button: 292 (0x124)
Available button: 293 (0x125)
Available button: 294 (0x126)
Available button: 295 (0x127)
Available button: 296 (0x128)
Available button: 297 (0x129)
Available button: 298 (0x12a)
Available button: 299 (0x12b)
Available axis: 0 (0x0)
Available axis: 1 (0x1)
Available axis: 2 (0x2)
Available axis: 5 (0x5)
Available axis: 16 (0x10)
Available axis: 17 (0x11)
Available axis: 40 (0x28)
Axis 0 : parameters = [0,255]
Axis 1 : parameters = [0,255]
Axis 2 : parameters = [0,255]
Axis 3 : parameters = [0,255]
Axis 4 : parameters = [-1,1]
Axis 5 : parameters = [-1,1]
Axis 6 : parameters = [0,255]
Input device name: "GreenAsia Inc.    USB Joystick     " on device "/dev/input/event6"
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 87 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 20 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 69 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 111 48 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 127 -64 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -127 32 -127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -127 -39 -69 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 -117 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 -127 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 40 -35 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 49 127 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 127 127 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -53 127 127 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 8 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 84 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 -66 0 0 0 0 127 0 0 0
buttons 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 0 0 0 0 0 127 0 0 0
buttons 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 127 0 0 0 0 127 0 0 0
buttons 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 | axis 47 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 59 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -105 -127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -78 -127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -99 0 0 0 0 127 0 0 0
buttons 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0

Then creating an xml configuration file such as:

paul@ledelle:~/paparazzi3/trunk/sw/ground_segment/joystick$ medit ngs_set_actuators.xml

and now running the input2ivy ocaml application:

export PAPARAZZI_HOME=/home/paul/paparazzi3/trunk
paparazzi3/trunk/sz/ground_segment/joystick/input2ivy -ac TJOVERO ngs_set_actuators.xml

running ivyprobe we can see the message getting transmitted:

paul@ledelle:~/paparazzi3/trunk/sw/ground_segment/joystick$ ivyprobe '(.*)'

shows:

Paparazzi joystick sent  'input2ivy SET_ACTUATOR 1496 2 3'

but we have to make sure the server knows this message needs to be forwarded: in messages.xml the message should be labeled as "forwarded" :

 <message name="SET_ACTUATOR" id="100" link="forwarded">
   <field name="value" type="uint16"/>
   <field name="no" type="uint8"/>
   <field name="ac_id" type="uint8"/>
 </message>

To send settings use the actuators.xml file:

<settings>
    <dl_settings NAME="Actuators" >
      <dl_setting VAR="actuators[1]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan1"/>
      <dl_setting VAR="actuators[2]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan2"/>
      <dl_setting VAR="actuators[3]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan3"/>
      <dl_setting VAR="actuators[4]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan4"/>
      <dl_setting VAR="actuators[5]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan5"/>
      <dl_setting VAR="actuators[6]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan6"/>
      <dl_setting VAR="actuators[7]" MIN="900" STEP="1" MAX="2100" module="actuators" shortname="chan7"/>
    </dl_settings>
</settings>

Vehicle-side configuration

On the vehicle side we are using a twog for hardware so we will use the setup_actuators target found in /conf/autopilot/setup.makefile. This makefile is used by the tiny.makefile which is used because we specify we're using the twog in twinjet_overo.xml

  <firmware name="fixedwing">
    <target name="ap" 			board="twog_1">

The setup target is defined as follows in the airframe (twinjet_overo.xml):

  <firmware name="setup">
    <target name="tunnel" 		board="twog_1" />
    <target name="setup_actuators" 	board="twog_1" />
  </firmware>

If we were adding the joystick to the autopilot code we could instead add the following line to the firmware section:

but that's another project...

Here's the setup.makefile section that worked for me:

setup_actuators.CFLAGS += -DFBW -DLED -DTIME_LED=1 -DACTUATORS=\"servos_4017_hw.h\" -DSERVOS_4017
setup_actuators.CFLAGS += -DUSE_UART1 -DUART1_BAUD=B57600 -DDOWNLINK_DEVICE=Uart1 -DPPRZ_UART=Uart1 
setup_actuators.CFLAGS += -DDOWNLINK -DDOWNLINK_TRANSPORT=PprzTransport -DDATALINK=PPRZ 
setup_actuators.CFLAGS += -DDOWNLINK_FBW_DEVICE=Uart1 -DDOWNLINK_AP_DEVICE=Uart1
setup_actuators.srcs += sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c pprz_transport.c downlink.c actuators.c setup_actuators.c $(SRC_ARCH)/uart_hw.c $(SRC_ARCH)/servos_4017_hw.c main.c

Paul Cox Notes

Contents

LISTS

Links

TODO

PERSO TODO

BUY BUY BUY

IDEAS

Random Notes

ubuntu packages

Utilities

paparazzi

perl modules

CGI webserver

openrobots

Using a joystick to control twog servo

PC-side configuration

Vehicle-side configuration

Navigation menu

Paul Cox Notes

LISTS

Links

TODO

PERSO TODO

BUY BUY BUY

IDEAS

Random Notes

ubuntu packages

Utilities

paparazzi

perl modules

CGI webserver

openrobots

Using a joystick to control twog servo

PC-side configuration

Vehicle-side configuration

Navigation menu

Search