Search results
Jump to navigation
Jump to search
- <li>[[Image:Ftdicbl.jpg|32px]]FTDI Serial Adapter Cable <li>Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop1 KB (193 words) - 05:41, 28 September 2013
- You can get the serial number of your FTDI usb/serial converter ATTRS{serial}=="A80081ej"2 KB (230 words) - 13:59, 29 April 2016
- Male JST connectors work well, you probably want at a minimum a 9V battery adapter to female JST and DC jack to female JST. ===Serial Connections===3 KB (582 words) - 18:09, 9 March 2011
- ...: hidden">[[Image:UU0_V1_1_Top_Prototype.jpeg |right|500px|UU0 USB to UART adapter V1.1]]</div> [http://1bitsquared.com/products/r0-radio-kit UU0] is a low cost USB to UART adapter dongle. [http://1bitsquared.com/products/r0-radio-kit UU0] is based on the2 KB (271 words) - 02:12, 21 March 2016
- ...al port, e.g. from the GPS, directly to the modem serial port or a USB-to-serial connection. This I/O in turn can go to your development PC for example. The You can either use a serial UART tunnel or USB tunnel:5 KB (777 words) - 12:46, 22 November 2017
- ...ring the serial programming to keep the GPS receiver quiet that shares the serial port with the download. ...st and most convenient method is to purchase or build a USB -> Serial 3.3V adapter similar to this one [http://www.ftdichip.com/Products/EvaluationKits/TTL-237 KB (1,255 words) - 09:20, 7 February 2013
- [[Image:Sht25.jpg|thumb|right|SHT25 on adapter board]] The sensor is supplied with an I2C interface. There will be an adapter board available in the Paparazzi hardware repository.3 KB (381 words) - 11:59, 5 March 2013
- ...B port on a Parrot Drone. The first kick-off on this page is about using ''serial devices via USB'', the most common scenario. Ofcourse there are more, feel == Serial modem on Parrot ==10 KB (1,669 words) - 07:48, 18 May 2022
- === FTDI serial adapter not working on old Ubuntu version === ...iver interferes with FTDI USB Serial adapters. If somehow your FTDI serial adapter does not work, remove the package via:12 KB (1,720 words) - 10:55, 5 February 2020
- ...are or want to do serious Paparazzi development work, you will need a JTAG adapter like this. ...m [http://www.blacksphere.co.nz Black Sphere Technologies], a JTAG and SWD Adapter used for programming and debugging ARM Cortex MCUs.5 KB (728 words) - 05:35, 4 March 2016
- * 1 x Cortex JTAG connector to 4 pin SWD connector adapter * 1 x TTL level UART adapter11 KB (1,859 words) - 12:30, 6 January 2016
- [[Image:Multi_i2c_ms5611.jpg|thumb|right|MS5611-01BA01 as part of the multi adapter board]] ...and transmitted every 30 seconds. They can be seen as some sort of unique serial number.4 KB (607 words) - 11:22, 21 August 2014
- Note: Some STM32 MCUs can also be flashed via Serial and or USB DFU! But SWD and JTAG provide much better debugging capabilities ...s/system-ip/debug-trace/coresight-soc-components/serial-wire-debug.php ARM Serial Wire Debug (SWD)] is a program and debug protocol for ARM processors. It's8 KB (1,238 words) - 05:32, 28 November 2017
- * [[UU0]] USB to UART adapter dongle * USB to Serial converters (XBEE adapter)7 KB (943 words) - 08:57, 18 June 2016
- * Pierre will build an adapter board between his current dev board and gumstix connector Tried to get rt2780usb wifi dongle working with lisa, no luck : the adapter is recognized at some level as I get the following messages :18 KB (2,964 words) - 08:13, 29 March 2011
- * 2 TTL level serial ports for telemetry radio and GPS * 2 serial input interfaces for remote control receivers (using Spektrum compatible JS6 KB (918 words) - 17:14, 16 August 2016
- ...to [http://www.ftdichip.com/Support/SoftwareExamples/MPSSE/FTCI2C.htm| 12C adapter]] board, while possible, not done yet. Work is on its way to test it. === Serial ===10 KB (1,572 words) - 07:56, 23 February 2019
- |3||TX||OUT||USART1 Serial Output (3.3V level)||style="background:Yellow; color:black"|Yellow |4||RX||IN||USART1 Serial Input (3.3V level)(5V tolerant)||style="background:Orange; color:white"|Ora19 KB (2,935 words) - 19:15, 2 August 2013
- ...C2148 based Paparazzi autopilots. Just the cable is different. Using UART0/serial to load the image.</p> <p>Create an adapter cable that has Tx/Rx and Ground along with the ability to hold P0.14 low (i10 KB (1,470 words) - 18:43, 1 April 2012
- : The LPC has one "full-featured" serial port and one basic serial port. |+'''SERIAL'''23 KB (3,563 words) - 05:42, 28 September 2013