Difference between revisions of "MeteoStick v1.00"
Jump to navigation
Jump to search
(Mechanical) |
|||
| Line 115: | Line 115: | ||
[[Image:MeteoStick_v100_side_mechanical_dimensions.png|600px|MeteoStick v1.00 Side Mechanical Dimensions]] | [[Image:MeteoStick_v100_side_mechanical_dimensions.png|600px|MeteoStick v1.00 Side Mechanical Dimensions]] | ||
[[Category: | [[Category:Payloads]] | ||
Revision as of 08:05, 20 April 2016
MeteoStick is a temperature, humidity, absolute pressure (Barometer) and differential pressure (airspeed/pitot) precision measurement board.
Features
Hardware Revision History
| Version # | Release Date | Release Notes |
|---|---|---|
| v1.00 | 11/2014 | Initial release of MeteoStick |
Pictures
MeteoStick v1.00 3D top view
Pinout
Pins Name and Type are specified with respect to the MeteoStick Board
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | GND | PWR | Common Ground |
| 2 | VBAT | PWR | +7 to 20V Power Supply (3-4 Lipo Cells) |
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | GND | PWR | Common Ground |
| 2 | CS BARO | IN | Barometer ADC Chip Select (Active Low) |
| 3 | CS PITOT | IN | Airspeed/Pitot ADC Chip Select (Active Low) |
| 4 | CS TEMP | IN | Temperature ADC Chip Select (Active Low) |
| 5 | CS MEM | IN | EEPROM Memory Chip Select (Active Low) |
| 6 | SCLK | IN | SPI Clock Input (Clock Output from Master) |
| 7 | MOSI | IN | SPI Master Out Slave In. MeteoStick Data Input (Data Output from Master) |
| 8 | MISO | OUT | SPI Master In Slave Out. MeteoStick Data Output (Data Input from Master) |
| 9 | HUM | OUT | Humidity Controlled Oscillator Output |
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
| 2 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
| 3 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
| 4 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
Schematic
PCB
Gerber & Drill Files
2 Layers PCB design Eurocircuits 6-C class compliant:
Download MeteoStick v1.00 gerber & drill files (zip)
RS274X, units = Inches, format = 2:5
- MeteoStick_v100_Silkscreen_Top.GBR (Top Print Layer)
- MeteoStick_v100_Soldermask_Top.GBR (Top Solder Mask)
- MeteoStick_v100_Paste_Mask_Top.GBR (Top Paste Mask, stencil)
- MeteoStick_v100_Signal_Top.GBR (Top Copper Layer)
- MeteoStick_v100_Signal_Bottom.GBR (Bottom Copper Layer)
- MeteoStick_v100_Soldermask_Bottom.GBR (Bottom Solder Mask)
- MeteoStick_v100_Outline.GBR (Board Outline)
- MeteoStick_v100_Drill.GBR (NC XY coordinates & Drill tools sizes)
Assembly
Components Layout
CricketProbe v1.00 top components Layout
CricketProbe v1.00 top components detail
Mechanical Dimensions
