Users

Please add yourself to this list if you wish to share who you are and what you are doing with Paparazzi

Asia

Name	Location	Hardware	Joined	Current activities / project status
New User	1	2	3	4
M Mundhra	India	Tiny 1.3	2007	Gain tuning on a flying wing configuration airframe
Jianlun	Singapore	TWOG V1	2008	trying to get TWOG onto an EasyStar. very much a newbie!

---

Europe

Name	Location	Hardware	Joined	Current activities / project status
SilaS	Budapest	Tiny 1.3	2007	Applied tiny to GWS Estarter, finished long travels in AUTO2. Now transfert it to a Twinstar and working on pairing tiny with FPV.
TomS	Graz	Tiny 2.11	2008	Starting to complete the wiring for the tiny and then trying to apply it to my TwinStar II.
MarkG	Geneva, Switzerland	Modified Tiny 2.11, EeePC as GCS, Multiplex FunJet	2008	Many successful flights.
X-MicroDrones	Paris, France	Tiny 2.11, Quad-Tilt-Rotor VTOL	2008	Wiring completed, first flights soon... We're trying to adapt Paparazzi to a Quad-Tilt-Rotor VTOL able to perform both airplane-like and helicopter-like flights. Working on inertial measurement units implementation.
Marcus Wolschon	Freiburg, Germany	Gumstix, Paraplane	2008	Porting Paparazzi to Linux-Userland with UDP-communication using mesh-networking. UDP-Downlink working, GPS via GPSD working, Pararazzi in Linux working, Hardware still RC-only due to sensor-soldering-issues
CedricM	Geneva, Switzerland	Tiny 2.11, Multiplex FunJet with video camera	2008	Many successful flights working on an osd module and weather probes.
Chris Efstathiou	Piraeus Hellas	tiny 2.11 on a Mpx EasyGlider, TWOG 1.3 on a Boomerang turbine jet	2008	The Easyglider is fully operational, still working on the jet which had his first flight with the TWOG at 25/1/2009
FelixR	Edinburgh, Scotland	Booz2 quadrotor	2008	remote controlled flight, working on Kalman Filter
Rui Costa	Portugal, Azores	Outrunner Twinstar II with Tiny 2.11, Aerocomm datalink, 1W video tx	2008	Only ground test and software configuration.
Alan K	Middlesbrough, England	Tiny 2.11 & MaxStream	2008	Just starting.
New User	1	2	3	4

---

North America

Name	Location	Hardware	Joined	Current activities / project status
Paul Cox	Vancouver, WA 98663	Tiny v2.11	Nov. 2008	Getting geared up for a maiden flight soon hopefully. Skype: pauldanielcox Gtalk: [use email]
John Burt	Portland, Oregon	Tiny v2.11 + LEA-4H (PPZUAV), Multiplex Cularis/Easystar, 9Xtend modem, T7CAP TX, ground station: EEE PC701 and/or Nokia N810	Jan 2009	Tuning IR sensors, building removable sensor mount. Preparing for flight tests w/ Easystar.
David Conger	San Diego (Ramona), California	Tiny1.3 (PPZUAV)	Sept 2007	Flying Wing MAV with onboard video. Test platform for the new 900mhz XBPro 900 RF modems.
USU AggieAir Remote Sensing	Logan, UT	TWOG (PPZUAV)	January 2009	Building 72" Flying Wings which will be used for remote sensing. Routine autonomous flight.
USU OSAM-UAV	Logan, UT	TWOG (PPZUAV)	June 2007	2x72" 5x48" 1x60" Flying Wings. Research backyard for AggieAir Remote Sensing. Routine autonomous flight.
New User	1	2	3	4

---

Central America

Name	Location	Hardware	Joined	Current activities / project status
Joekadet	David Panama'	Tiny v2.11/LEA-4P (PPZUAV) No RF Modems yet. Multiplex Mentor	2008	Working on Airframe build. Paparazzi AP is wired and working awaiting integration into airframe. First flight hopefully end of February.
New User	1	2	3	4

---

Australia

Name	Location	Hardware	Joined	Current activities / project status
Todd Sandercock	Adelaide, SA	Tiny v2.11, Multiplex Twinjet, 9Xtend modems	Jan 2008	Completed successful flight testing. Now designing new airframe.
New User	1	2	3	4