MeteoStick v1.00

From PaparazziUAV
(Redirected from MeteoStick/v1.00)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

MeteoStick is a temperature, humidity, absolute pressure (barometer) and differential pressure (airspeed/pitot) precision measurement board.

Category Payloads not found
MeteoStick v1.00 top side

Hardware Revision History

Version # Release Date Release Notes
v1.00 11/2014 Initial release of MeteoStick

Features

Temperature

  • designed for standard external PT1000 RTD temperature sensor
  • 24bit resolution ADC (SPI)

Humidity

  • designed for IST P14 (Rapid/Femtocap) external capacitive humidity sensor
  • Humidity controlled oscillator (square wave)

Baro-Altimeter

  • inboard MPXH6115AC6U Freescale absolute pressure sensor
  • 24bit resolution ADC (SPI)

Airspeed

  • inboard MPXV5004DP Freescale differential pressure sensor
  • 24bit resolution ADC (SPI)

Calibration parameters

  • 256kbit(64byte) non-volatile memory for sensor calibration values

Power Supply

  • 7 to 20v (3-4 Lipo cells)

Pictures

Pinout

MeteoStick v100 pinout.png

Pins Name and Type are specified with respect to the MeteoStick Board

Power SUPPLY
Pin # Name Type Description
1 GND PWR Common Ground
2 VBAT PWR +7 to 20V Power Supply (3-4 Lipo Cells)


CONTROL
Pin # Name Type Description
1 GND PWR Common Ground
2 CS BARO IN Barometer ADC Chip Select (Active Low)
3 CS PITOT IN Airspeed/Pitot ADC Chip Select (Active Low)
4 CS TEMP IN Temperature ADC Chip Select (Active Low)
5 CS MEM IN EEPROM Memory Chip Select (Active Low)
6 SCLK IN SPI Clock Input (Clock Output from Master)
7 MOSI IN SPI Master Out Slave In. MeteoStick Data Input (Data Output from Master)
8 MISO OUT SPI Master In Slave Out. MeteoStick Data Output (Data Input from Master)
9 HUM OUT Humidity Controlled Oscillator Output


SENSORS
Pin # Name Type Description
1 TEMP SENS IN Temperature Sensor Input (PT1000 RTD)
2 TEMP SENS IN Temperature Sensor Input (PT1000 RTD)
3 HUM SENS IN Humidity Sensor Input (P14 Capacitive)
4 HUM SENS IN Humidity Sensor Input (P14 Capacitive)

Schematic

MeteoStick v1.00 Schematic


PCB

Gerber & Drill Files

2 Layers PCB design Eurocircuits 6-C class compliant:

Download MeteoStick v1.00 gerber & drill files (zip)

RS274X, units = Inches, format = 2:5

  • MeteoStick_v100_Silkscreen_Top.GBR (Top Print Layer)
  • MeteoStick_v100_Soldermask_Top.GBR (Top Solder Mask)
  • MeteoStick_v100_Paste_Mask_Top.GBR (Top Paste Mask, stencil)
  • MeteoStick_v100_Signal_Top.GBR (Top Copper Layer)
  • MeteoStick_v100_Signal_Bottom.GBR (Bottom Copper Layer)
  • MeteoStick_v100_Soldermask_Bottom.GBR (Bottom Solder Mask)
  • MeteoStick_v100_Outline.GBR (Board Outline)
  • MeteoStick_v100_Drill.GBR (NC XY coordinates & Drill tools sizes)

Assembly

Components Layout

Mechanical Dimensions

MeteoStick v1.00 Top Mechanical Dimensions MeteoStick v1.00 Side Mechanical Dimensions

Previous Versions