User:Esden/Autopilot Comparison
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Avail | MCU | Sensors | IO/Comm | Periph | Program/Debug | Power | Mechanical | Release/Version | |||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | Version | Active | Buy | Part | Clock | Flash | RAM | IMU | Mag | Baro | Diff | GPS | UART | I2C | SPI | ADC | PWM | PPM out | PPM in | R/C serial | GPIO | LED | USB | CAN | MODEM | SD | RTC | Other | Input | Output | Switch | Size | Weight | Connectors | PCB Type | Mounting | Date Introduced | Previous Version | |
Lisa/L | v1.1 | N | STM32F103RE | 72MHz | 512kB | 64kB | N | N | Y | Y | N | 3 & 1RX | 2 | 2 | 3 (12bit) | 6 | N | 1 | 8 | JTAG + UART | 1 | N | N | N | Overo Gumstix | JTAG + UART | 6.1V - 18V | 2.25@5V, 2.25A@3.3V, Other | 2 | ~100mm x ~50mm | Picoblade | 4-layer | 4 x M3 | Summer 2010 | v1.0 | ||||
Lisa/M | V2.1 | Y | Buy | STM32F105RCT6 | 72MHz | 256kB | 64kB | Y | Y | Y | N | N | 2 & 2RX | 1 + 15 | 1 | 3 + 2 (12bit)5 | 6 + 25 | N | 0 + 15 | 2 | 1 | 5 | DFU bootloader | 1 | N | N | N | JTAG | USB (luftboot)+ JTAG + UART | 5V - 16V | 500mA@3.3V, 250mA@5V | N | 34mm x 60mm x 10mm | 9.9g - 10.8g | Picoblade & 0.1" Servo | 4-layer | 4 x M3 | Winter 2012 | v2.0 |
Lisa/S | V1.1 | Y | Buy | STM32F103REY6 | 72MHz | 512kB | 64kB | Y | Y | Y | N | Y | 1 & 1RX | 18 | 0 | 0 | 6 | N | 1 | 1 | 0 | 4 | N | 1 | N | N | N | 4 x brushed motor drivers | SWD + UART | 2.3V - 5.5V | 1A@3.3V | 1 | 20mm x 20mm x 5mm | 2g | 0.05" header | 6-layer | 4 x M2 | Summer 2013 | v1.0 |
Elle0 | V1.2 | Y | Pre-Order | STM32F415RCT6 | 168MHz | 1024kB | 192kB | Y | Y | Y | N | N | 2 & 2RX/TX | 1 | 0 | 2 | 8 | N | 1-8 | 2 | 4 | DFU bootloader | 110 | N | N | N | micro-USB B, JTAG | USB (DFU) + JTAG | 5V | 2x299mA@3.3V | 1 | 36mm x 36mm | JST9 + 0.1" pin header | 4-layer | 4 x M3 | Winter 2015 | v1.1 | ||
KroozSD | Y | Buy | STM32F405RGT6 | 168MHz | 1024kB | 128 & 64kB | krooz/ext | Y | Y | N | N | 3 | 2 | 1 | 4 + 1 (12bit)5 | 10 + 15 | N | 1 | 2 + 15 | 3 | bootloader | Y | Xbee | SPI | N | micro-USB B | 7V - 32V | 1.5A@3.3V, 5A@5V | N | 50mm x 60mm x 10mm | 20g - 40g | Picoblade & 0.1" Servo | 2-layer | 4 x M3 | Spring 2013 | Krooz | |||
Apogee | V1.00 | Y | Buy | STM32F405RGT6 | 168MHz | 1024kB | 128 & 64kB | Y | Y | Y | N | N | 3 & 1Rx | 2 | 1 | 0 + 3 (12bit) | 6 + 1 | N | 1 + 15 | 1 (std & S.BUS) | 0 + 4 | 4 | DFU bootloader + USB storage | Y | N | SDIO + USB storage | yes + backup cap | mini-USB B | USB(DFU) + SWD | 5.5V - 17V | 1A@3.3V, 1.5A@5V | 1 (5V) | 53 x 25 x 9mm | 10g | Picoblade | 4-layer | 4 x M2 | Summer 2013 | |
Umarim | V1.0 | N | LPC2148 | 60MHz | 512kB | 32kB & 8kB | Y | N | Y | N | N | 2 | 2 | 1 | 0 + 4 (10bit) | 6 | N | 1 + 15 | 0 + 46 | 2 | bootloader | Y | N | N | N | USB (pprz bootloader) | 5.5V - 17V | 1A@3.3V, 1.5A@5V | N | 56mm x 25mm | 9g | Picoblade | 4-layer | 4 x M2 | Fall 2011 | ||||
Umarim Lite | V2 | Y | Buy | LPC2148 | 60MHz | 512kB | 32kB & 8kB | Y | N | N | N | N | 2 | 1 | 1 | 86 | 6 | N | 1 + 15 | 0 + 46 | 2 | bootloader | Y | N | N | N | mini-USB B | USB (pprz bootloader) | 5.5V - 17V | 1A@3.3V, 1.5A@5V | N | 53mm x 25mm | 8g | Picoblade | 4-layer | 4 x M2 | Summer 2012 | ||
NavGo | V3 | N | Buy | LPC2148 | 60MHz | 512kB | 32kB & 8kB | Y | Y | Y | N | N | 2 | 2 | 1 | 0 + 4 (10bit)6 | 0 + 15 | N | 1 | 0 + 26 | 4 | bootloader | Y | N | N | N | USB (pprz bootloader) | 5.5V - 16V | 1A@3.3V, 1.5A@5V | N | 35mm x 35mm | Picoblade | 4-layer | 4 x M2 | Summer 2012 | ||||
Tiny | v2.11 | N | LPC2148 | 60MHz | 512kB | 32kB & 8kB | N | N | N | N | Y | 1 | 1 | 1 | 0 + 1 (10bit)6 | 8 | 1 | 1 | 2 | 3 | bootloader | Y | N | N | N | USB (pprz bootloader) | 6.1V - 18V | 1A@3.3V, 2.25A@5V | 1 | 70.8mm x 40mm | 24g | Picoblade | 2-layer | no | Fall 2007 | v1.1 | |||
TWOG | v1.0 | N | LPC2148 | 60MHz | 512kB | 32kB & 8kB | N | N | N | N | N | 2 | 1 | 1 | 8 (10bit) | 8 | 1 | 1 | 2 | 3 | bootloader | Y | N | N | N | USB (pprz bootloader) | 6.1V - 18V | 1A@3.3V, 2.25A@5V | 1 | 40.2mm x 30.5mm | 8g | Picoblade | 2-layer | no | Spring 2008 | ||||
YAPA | v2.0 | N | LPC2148 | 60MHz | 512kB | 32kB & 8kB | N | N | N | N | N | 2 | 1 | 1 | 6 (10bit) | 10 | N | 1 | 1 | 3 | bootloader | Y | Xbee | N | N | RS232 | USB (pprz bootloader) | 6.1V - 18V | 2x 1A@3.3V, 2.25A@5V | 1 | 80.0mm x 40.0mm? | 23g w/ XBee? | 0.1" Headers | 2-layer | 4x M3 | Spring 2011 | v1.0 | ||
HBmini | v2.0 | N | LPC2148 | 60MHz | 512kB | 32kB & 8kB | Y | Y | Y | N | N | 2 | 2 | 1 | 8 (10bit)(16bit) | 10 | 11 | 2 | bootlader | N | N | N | N | Buzzer | JTAG | 6.1-18V | 1A@3.3V, 2.25A@5V | 4 | 57x30mm | 30 | Picoblade & 0.1" Servo | 4-layer | 4 x M2 | Winter 2012 |