Setting up simulation environment
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
This page will guide you step-by-step through the process of setting up an environment to simulate the AR.Drone 2 controlled by Paparazzi. This will describe how to set up the simulation environment in Linux. It has been tested using Ubuntu, but it should work under any recent distro.
- Install the ground station. See Installation.
- Install JSBSim. See JSBSim.
- Install Flightgear and link it to Paparazzi. See Simulation#View_the_simulation_in_Flight_Gear.