MeteoStick v1.00
(Redirected from MeteoStick/v1.00)
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
MeteoStick is a temperature, humidity, absolute pressure (barometer) and differential pressure (airspeed/pitot) precision measurement board.
Category Payloads not found
Hardware Revision History
| Version # | Release Date | Release Notes |
|---|---|---|
| v1.00 | 11/2014 | Initial release of MeteoStick |
Features
Temperature
- designed for standard external PT1000 RTD temperature sensor
- 24bit resolution ADC (SPI)
Humidity
- designed for IST P14 (Rapid/Femtocap) external capacitive humidity sensor
- Humidity controlled oscillator (square wave)
Baro-Altimeter
- inboard MPXH6115AC6U Freescale absolute pressure sensor
- 24bit resolution ADC (SPI)
Airspeed
- inboard MPXV5004DP Freescale differential pressure sensor
- 24bit resolution ADC (SPI)
Calibration parameters
- 256kbit(64byte) non-volatile memory for sensor calibration values
Power Supply
- 7 to 20v (3-4 Lipo cells)
Pictures
MeteoStick v1.00 3D top view
Pinout
Pins Name and Type are specified with respect to the MeteoStick Board
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | GND | PWR | Common Ground |
| 2 | VBAT | PWR | +7 to 20V Power Supply (3-4 Lipo Cells) |
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | GND | PWR | Common Ground |
| 2 | CS BARO | IN | Barometer ADC Chip Select (Active Low) |
| 3 | CS PITOT | IN | Airspeed/Pitot ADC Chip Select (Active Low) |
| 4 | CS TEMP | IN | Temperature ADC Chip Select (Active Low) |
| 5 | CS MEM | IN | EEPROM Memory Chip Select (Active Low) |
| 6 | SCLK | IN | SPI Clock Input (Clock Output from Master) |
| 7 | MOSI | IN | SPI Master Out Slave In. MeteoStick Data Input (Data Output from Master) |
| 8 | MISO | OUT | SPI Master In Slave Out. MeteoStick Data Output (Data Input from Master) |
| 9 | HUM | OUT | Humidity Controlled Oscillator Output |
| Pin # | Name | Type | Description |
|---|---|---|---|
| 1 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
| 2 | TEMP SENS | IN | Temperature Sensor Input (PT1000 RTD) |
| 3 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
| 4 | HUM SENS | IN | Humidity Sensor Input (P14 Capacitive) |
Schematic
PCB
Gerber & Drill Files
2 Layers PCB design Eurocircuits 6-C class compliant:
Download MeteoStick v1.00 gerber & drill files (zip)
RS274X, units = Inches, format = 2:5
- MeteoStick_v100_Silkscreen_Top.GBR (Top Print Layer)
- MeteoStick_v100_Soldermask_Top.GBR (Top Solder Mask)
- MeteoStick_v100_Paste_Mask_Top.GBR (Top Paste Mask, stencil)
- MeteoStick_v100_Signal_Top.GBR (Top Copper Layer)
- MeteoStick_v100_Signal_Bottom.GBR (Bottom Copper Layer)
- MeteoStick_v100_Soldermask_Bottom.GBR (Bottom Solder Mask)
- MeteoStick_v100_Outline.GBR (Board Outline)
- MeteoStick_v100_Drill.GBR (NC XY coordinates & Drill tools sizes)
Assembly
Components Layout
MeteoStick v1.00 top components Layout
MeteoStick v1.00 top components detail
Mechanical Dimensions
