User:CSU-FCUAV
CSU - Long Endurance Flight Team
The long endurance unmanned aerial vehicle (UAV) has significant value as a low-cost, autonomous reconnaissance and remote sensing platform for research, commercial and military missions. Fuel cell powerplants are of interest in this application because of the potential to construct powerplants of high specific energy, low noise, low thermal signature, and improved environmental compatibility.
Because of these performance advantages, fuel cells have recently found their first aviation applications as powerplants for small-scale long-endurance and long-range UAVs.
The increasing interest in practical fuel cell powered UAVs motivated research into design methods for fuel cell powered aircraft. The purposes of the design studies are 1) to characterize the design tradeoffs and optimal configurations of aviation-specific fuel cell powerplants, 2) to compare the performance of fuel cell aircraft to conventional aircraft, and 3) to function as a preliminary design tool in a development process for a fuel cell UAV.
Hobby Lobby Senior Telemaster ARF Autopilot/Sensor Mule
Specs:
Airframe: Hobby Lobyy Senior Telemaster ARF
RX: Futaba R6014FS to PPZUAV PPM Encoder
Autopilot: Tiny 2.11 LEA-5H from PPZUAV
Link: XBee Pro 2.4 GHz
IR: PPZUAV IRV and IRH Sensors
Extras: Spartan DS760 AVCS Gyro
Associated Files:
Airframe: CSU_Telemaster
Heading Hold Gyro: CSU_SpartanDS760
Media:
Long Endurance Hand Launchable Man Packable UAV
Specs:
Status: Rebuild
Airframe: CSU MPUAV
RX: Modified Futaba R617FS
Autopilot: Tiny 2.11 LEA-5H from PPZUAV
Link: XBee Pro 2.4 GHz
IR: FMA IRV and IRH Sensors
Associated Files:
Airframe: CSU_Telemaster
Media:
First Hand Launch Attempt
Second Hand Launch Attempt Crash Feed
Vertical Take-Off and Landing UAV
Status: Build
Airframe: Hangar 9 Twist 60
RX: Futaba R6014FS to PPZUAV PPM Encoder
Autopilot: Tiny 2.11 LEA-5H from PPZUAV
Link: XBee Pro 2.4 GHz
Associated Files:
Airframe: CSU_Telemaster
Media:
First Hand Launch Attempt
Second Hand Launch Attempt Crash Feed
Contact Information
Dr. Thomas H. Bradley
Mechanical Engineering
Colorado State University