Users
Please add yourself to this list if you wish to share who you are and what you are doing with Paparazzi
Need help adding your information?
To have your information added by another paparazzi user, please send me an EMAIL at with the following:
- Name
- Location
- Hardware
- Join date
- Current activities / project status
Wiki pages
add a link to your users wiki page.
Asia
| Name | Location | Hardware | Joined | Current activities / project status |
|---|---|---|---|---|
| MNW | China | Tiny2.11 | 2009 | Just starting,having troubles with parts. |
| Shubham | India | Tiny2.11 | 2009 | Writing the configuration code for airframe |
| M Mundhra | India | Tiny 1.3 | 2007 | Gain tuning on a flying wing configuration airframe |
| Jianlun | Singapore | TWOG V1 | 2008 | trying to get TWOG onto an EasyStar. very much a newbie! |
| prashanth | India | Tiny 2.11 | 2008 | 6 autonomous flights till now, currently build a new wing like funjet |
| spencer | Taipei, Taiwan | none | 2009 | research for now, hope to take aerial photos of Taipei City soon |
Europe
| Name | Location | Hardware | Joined | Current activities / project status |
|---|---|---|---|---|
| SilaS | Budapest | Tiny 1.3 | 2007 | Applied tiny to GWS Estarter, finished long travels in AUTO2. Now transfert it to a Twinstar and working on pairing tiny with FPV. |
| TomS | Graz, Austria | Tiny 2.11 | 2008 | Starting to complete the wiring for the tiny and then trying to apply it to my TwinStar II. |
| MarkG | Geneva, Switzerland | Modified Tiny 2.11, EeePC as GCS, Multiplex FunJet | 2008 | Many successful flights. |
| X-MicroDrones | Paris, France | Tiny 2.11, Quad-Tilt-Rotor VTOL | 2008 | Wiring completed, first flights soon... We're trying to adapt Paparazzi to a Quad-Tilt-Rotor VTOL able to perform both airplane-like and helicopter-like flights. Working on inertial measurement units implementation. |
| Marcus Wolschon | Freiburg, Germany | Gumstix, Paraplane | 2008 | Porting Paparazzi to Linux-Userland with UDP-communication using mesh-networking.
UDP-Downlink working, GPS via GPSD working, Pararazzi in Linux working, Hardware still RC-only due to sensor-soldering-issues |
| CedricM | Geneva, Switzerland | Tiny 2.11, Multiplex FunJet with video camera | 2008 | Many successful flights working on an osd module and weather probes. |
| Chris Efstathiou | Piraeus Hellas | tiny 2.11 on a Mpx EasyGlider, TWOG 1.3 on a Boomerang turbine jet | 2008 | The Easyglider is fully operational, still working on the jet which had his first flight with the TWOG at 25/1/2009 |
| FelixR | Edinburgh, Scotland | Booz2 quadrotor | 2008 | remote controlled flight, working on Kalman Filter |
| Rui Costa | Azores, Portugal | Outrunner Twinstar II with Tiny 2.11, Aerocomm datalink, 1W video tx | 2008 | Only ground test and software configuration. |
| Alan K | Middlesbrough, England | Tiny 2.11 & MaxStream | 2008 | Just starting. |
| Gareth R | Sheffield, UK | Tiny 2.11, video, bunch of helicopters, Multiplex Mentor, Multiplex Funjet, Multiplex Fox, GWS Formosa | 2008 | Several AUTO2 flights, currently debugging |
| Andrew Saenko | Russia, St-Petersburg | Tiny 1.13, Tiny 2.11, 2.5 kg motorised glider, 800 g plane | 2007 | Automatic flight, adding own code. |
| David "Buzz" Carlson | Cyprus | Tiny 2.11, Lynx EDF & GWS SloStick, 9XTend datalink | 2008 | Quite a few AUTO2 flights. Plane currently grounded due to a TX run-in with a 1 year-old. Currently working on getting new TX and completing CBP store setup. |
| Nuno Guedes | Lamego, Portugal | Tiny 2.11 | 2008 | Starting |
| Martin Piehslinger | Vienna, Austria | Tiny 2.11 | 2008 | just starting
|
| AneMos-Group | Patras, Greece | Tiny 2.11, Quadrotor VTOL | 2008 | Working on IMU, Trying to implement Constrained Control for the quadrotor trajectory flight |
| Allan Ojala (VAMK) | Vaasa, Finland | TWOG, with AC4790 radio and LEA-5H GPS | 2009 | Just constructed my own first RC airplane SIG KADET. |
| Maik Hoepfel | Berlin, Germany | TWOG, Graupner Elektro Trainer S, Futaba 9C 35 Mhz | August 2009 | Getting started, planning to eventually use Paparazzi for a powered parachute |
| New User | 1 | 2 | 3 | 4 |
North America
| Name | Location | Hardware | Joined | Current activities / project status | |
|---|---|---|---|---|---|
| Matthew Currie | Nanaimo, BC Canada | Tiny 13 v1.1 (Self-built) | November 2006 | Funjet + XBee | |
| Paul Cox | Vancouver, WA 98663 | Tiny v2.11 | Nov. 2008 | GWS Slow Stick flying in AUTO2 reliably. Starting on stabilized video and payload drops Skype: pauldanielcox Gtalk: [use email] | |
| John Burt wiki page | Portland, Oregon | Tiny v2.11 + LEA-4H (PPZUAV), Multiplex Cularis/Easystar, 9Xtend modem, T7CAP TX, ground station: EEE PC701 and/or Nokia N810 | Jan 2009 | Initial flight tests w/ Easystar in AUTO1 & AUTO2.
| |
| Pat O'Gara | St. Paul, MN | Tiny 2.11 and TWOG (PPZUAV) | Oct. 2008 | Completed and flown FunJet and Minimag in Auto 2. Currently rebuilding MiniMag as an improved development platform. | |
| John Koches | Muskegon, Michigan | Tiny 2.11 (PPZUAV) | 2007 | currently flying a 48 inch zagi, 80 inch under construction. | |
| Steve Deguir | New York,New York | Tiny2.11+LEA-5H (PPZUAV), XbeePro 2.4, Berg4L, JR FMA | Feb 2009 | ||
| David Conger | San Diego (Ramona), California | Tiny1.3 (PPZUAV) | Sept 2007 | Flying Wing MAV with onboard video. Test platform for the new 900mhz XBPro 900 RF modems. | |
| Michael Evans | Seaside(Monterey Bay), California | Tiny2.11 (PPZUAV) | Feb 2009 | http://www.rcgroups.com/forums/showthread.php?t=1000937. | |
| USU AggieAir Remote Sensing | Logan, UT | TWOG (PPZUAV) | January 2009 | Building 72" Flying Wings which will be used for remote sensing. Routine autonomous flight. | |
| USU OSAM-UAV | Logan, UT | TWOG (PPZUAV) | June 2007 | 2x72" 5x48" 1x60" Flying Wings. Research backyard for AggieAir Remote Sensing. Routine autonomous flight. | |
| CSU Fuel Cell UAV | Fort Collins, Co | Tiny 2.11 + LEA-5H (PPZUAV), 2.4Ghz XBPro | Mar 2009 | Maiden flight complete Feb 28. New Airframe in development. | |
| Armen Gharibans | La Jolla, California | Tiny2.11 (PPZUAV) | March 2009 | UCSD Project with Multiplex Mentor. Completed August 2, 2009. Several Successful Auto2 Flights. A LOT of help from David Conger. | |
| New User | 1 | 2 | 3 | 4 |
Central America
| Name | Location | Hardware | Joined | Current activities / project status |
|---|---|---|---|---|
| Joekadet | David Panama' | Tiny v2.11/LEA-4P, RF Modems XBee Pro 2.4 GHz (PPZUAV). Multiplex Mentor | 2008 | Seven flights now. Flights 6 & 7 in Auto2. Now only a matter of fine tuning. |
| New User | 1 | 2 | 3 | 4 |
Australia
| Name | Location | Hardware | Joined | Current activities / project status |
|---|---|---|---|---|
| Todd Sandercock | Adelaide, SA | Tiny v2.11, Multiplex Twinjet, 9Xtend modems | Jan 2008 | Completed successful flight testing. Now designing new airframe. |
| Reuben Brown | Gawler, SA | Tiny v2.11 | May 2009 | Getting the autopilot set up |
| Bernard Davison | Neutral Bay, NSW | Tiny v2.11, Vertical + Horizontal IR sensors, XBee PRO modems, Futaba T6EXAP TX, Futaba R136F RX, Funjet, MacBook laptop | August 2008 | Configuring before first flight. |
| Chris Gough | Canberra | TWOG v2.11, EZ* | September 09 | not yet airborn |
Africa
| Name | Location | Hardware | Joined | Current activities / project status |
|---|---|---|---|---|
| W1th | South Africa KZN | TWOG V1 ,LEA-5H GPS , RF Modems XBee Pro 868 (CheBuzz) | July 2009 | New to this , Got TWOG,GPS etc interfacing with Laptop and working ..Made a website SCARF of my struggle ... |