Difference between revisions of "Developer Guide"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
*[[DevGuide/Values|Values]]<br><small>a short walk through the system</small> | *[[DevGuide/Values|Values]]<br><small>a short walk through the system</small> | ||
*[[DevGuide/USBDownload|USB Download]]<br><small>how the Paparazzi USB bootloader works</small> | *[[DevGuide/USBDownload|USB Download]]<br><small>how the Paparazzi USB bootloader works</small> | ||
*[[BootloaderUploadHowTo|Upload Bootloader]]<br><small>How to upload the Bootloader to the AP board</small> | *[[BootloaderUploadHowTo|Upload Bootloader]]<br><small>How to upload the Bootloader to a LPC2148 processor based AP board like the TWOG</small> | ||
*[[BootloaderUploadHowToSTM32|Upload the luftboot bootloader]]<br><small>How to upload the Bootloader to a STM32 processor based AP board like the LISA</small> | |||
*[[DevGuide/JTAG-Debug|JTAG-Debug]]<br><small>using JTAG to directly debug on the board</small> | *[[DevGuide/JTAG-Debug|JTAG-Debug]]<br><small>using JTAG to directly debug on the board</small> | ||
*[[DevGuide/DesignOverview|Design Overview]]<br><small>Attempt at a longer walk through the airborne code architerture</small> | *[[DevGuide/DesignOverview|Design Overview]]<br><small>Attempt at a longer walk through the airborne code architerture</small> | ||
Revision as of 05:22, 18 July 2012
A great resource for in-depth information.
By the time you land on this page, you probably want to enhance the Paparazzi project, that is really good for you karma and well appriciated. You are welcomed to enhance and extend this documentation.
- Contributing
how to contribute - Communications
how telemetry and datalink is done - Communications (Proposed New system)
how telemetry and datalink is done - Server-GCS communications
how the Server and the Ground Control Station interact with each other - Values
a short walk through the system - USB Download
how the Paparazzi USB bootloader works - Upload Bootloader
How to upload the Bootloader to a LPC2148 processor based AP board like the TWOG - Upload the luftboot bootloader
How to upload the Bootloader to a STM32 processor based AP board like the LISA - JTAG-Debug
using JTAG to directly debug on the board - Design Overview
Attempt at a longer walk through the airborne code architerture - Firmware Architecture
Attempt at brief overview of the firmware architecture with modules and subsystems - USB-Serial
using the USB instead of the UART for telemetry - Toolchain
Install Paparazzi ARM toolchain and IVY from scratch - Code Editing
How to setup an IDE for OCAML and C and C++ - Learning to Program
Improve your Paparazzi code in OCAML,C,C++ and Python - Paparazzi Math Library
The custom paparazzi math library (C) and how to use it in external programs - Settings
Settings is the generic mechanism that allows to set and get the value of any variable of the embedded code.