Users

Please add yourself to this list if you wish to share who you are and what you are doing with Paparazzi

Need help adding your information?

To have your information added by another paparazzi user, please send me an EMAIL at with the following:

• Name
• Email
• Location
• Hardware
• Join date
• Current activities / project status

Wiki pages

add a link to your users wiki page.

Dconger

MarcusWolschon

Alfamyke

Danstah

Martinmm

John Burt

SilaS

Mecevans

CSU-FCUAV

Pierre-Selim

martinpi

VAMK

Bernard Davison

Asia

Asia

Name	Location	Hardware	Joined	Current activities / project status
MNW	China	Tiny2.11	2009	Just starting,having troubles with parts.
Shubham	India	Tiny2.11	2009	Writing the configuration code for airframe
M Mundhra	India	Tiny 1.3	2007	Gain tuning on a flying wing configuration airframe
Jianlun	Singapore	TWOG V1	2008	trying to get TWOG onto an EasyStar. very much a newbie!
prashanth	India	Tiny 2.11	2008	6 autonomous flights till now, currently build a new wing like funjet
spencer	Taipei, Taiwan	none	2009	research for now, hope to take aerial photos of Taipei City soon

Europe

Name	Location	Hardware	Joined	Current activities / project status
SilaS	Budapest	Tiny 1.3	2007	Applied tiny to GWS Estarter, finished long travels in AUTO2. Now transfert it to a Twinstar and working on pairing tiny with FPV.
TomS	Graz, Austria	Tiny 2.11	2008	Starting to complete the wiring for the tiny and then trying to apply it to my TwinStar II.
MarkG	Geneva, Switzerland	Modified Tiny 2.11, EeePC as GCS, Multiplex FunJet	2008	Many successful flights.
X-MicroDrones	Paris, France	Tiny 2.11, Quad-Tilt-Rotor VTOL	2008	Wiring completed, first flights soon... We're trying to adapt Paparazzi to a Quad-Tilt-Rotor VTOL able to perform both airplane-like and helicopter-like flights. Working on inertial measurement units implementation.
Marcus Wolschon	Freiburg, Germany	Gumstix, Paraplane	2008	Porting Paparazzi to Linux-Userland with UDP-communication using mesh-networking. UDP-Downlink working, GPS via GPSD working, Pararazzi in Linux working, Hardware still RC-only due to sensor-soldering-issues
CedricM	Geneva, Switzerland	Tiny 2.11, Multiplex FunJet with video camera	2008	Many successful flights working on an osd module and weather probes.
Chris Efstathiou	Piraeus Hellas	tiny 2.11 on a Mpx EasyGlider, TWOG 1.3 on a Boomerang turbine jet	2008	The Easyglider is fully operational, still working on the jet which had his first flight with the TWOG at 25/1/2009
FelixR	Edinburgh, Scotland	Booz2 quadrotor	2008	remote controlled flight, working on Kalman Filter
Rui Costa	Azores, Portugal	Outrunner Twinstar II with Tiny 2.11, Aerocomm datalink, 1W video tx	2008	Only ground test and software configuration.
Alan K	Middlesbrough, England	Tiny 2.11 & MaxStream	2008	Just starting.
Gareth R	Sheffield, UK	Tiny 2.11, video, bunch of helicopters, Multiplex Mentor, Multiplex Funjet, Multiplex Fox, GWS Formosa	2008	Came 4th in EMAV09 (although won the Golden Balls award for courage in the face of adversity and exceptional partying). Many AUTO2 flights with a camera and XBee868s. Current main airframe is a GWS Formosa (they are so cheap!).
Andrew Saenko	Russia, St-Petersburg	Tiny 1.13, Tiny 2.11, 2.5 kg motorised glider, 800 g plane	2007	Automatic flight, adding own code.
David "Buzz" Carlson	Cyprus	Tiny 2.11, Lynx EDF & GWS SloStick, 9XTend datalink	2008	Quite a few AUTO2 flights. Plane currently grounded due to a TX run-in with a 1 year-old. Currently working on getting new TX and completing CBP store setup.
Nuno Guedes	Lamego, Portugal	Tiny 2.11	2008	Starting
Martin Piehslinger	Vienna, Austria	Tiny 2.11	2008	just starting
AneMos-Group	Patras, Greece	Tiny 2.11, Quadrotor VTOL	2008	Working on IMU, Trying to implement Constrained Control for the quadrotor trajectory flight
Allan Ojala (VAMK)	Vaasa, Finland	TWOG, with AC4790 radio and LEA-5H GPS	2009	Just constructed my own first RC airplane SIG KADET.
Maik Hoepfel	Berlin, Germany	TWOG, Graupner Elektro Trainer S, Futaba 9C 35 Mhz	August 2009	Getting started, planning to eventually use Paparazzi for a powered parachute
New User	1	2	3	4

North America

Name	Location	Hardware	Joined	Current activities / project status
Matthew Currie	Nanaimo, BC Canada	Tiny 13 v1.1 (Self-built)	November 2006	Funjet + XBee
Paul Cox	Vancouver, WA 98663	Tiny v2.11	Nov. 2008	GWS Slow Stick flying in AUTO2 reliably. Starting on stabilized video and payload drops Skype: pauldanielcox Gtalk: [use email]
John Burt wiki page	Portland, Oregon	Tiny v2.11 + LEA-4H (PPZUAV), Multiplex Cularis/Easystar, 9Xtend modem, T7CAP TX, ground station: EEE PC701 and/or Nokia N810	Jan 2009	Initial flight tests w/ Easystar in AUTO1 & AUTO2.
Pat O'Gara	St. Paul, MN	Tiny 2.11 and TWOG (PPZUAV)	Oct. 2008	Completed and flown FunJet and Minimag in Auto 2. Currently rebuilding MiniMag as an improved development platform.
John Koches	Muskegon, Michigan	Tiny 2.11 (PPZUAV)	2007	currently flying a 48 inch zagi, 80 inch under construction.
Steve Deguir	New York,New York	Tiny2.11+LEA-5H (PPZUAV), XbeePro 2.4, Berg4L, JR FMA	Feb 2009
David Conger	San Diego (Ramona), California	Tiny1.3 (PPZUAV)	Sept 2007	Flying Wing MAV with onboard video. Test platform for the new 900mhz XBPro 900 RF modems.
Michael Evans	Seaside(Monterey Bay), California	Tiny2.11 (PPZUAV)	Feb 2009	http://www.rcgroups.com/forums/showthread.php?t=1000937.
USU AggieAir Remote Sensing	Logan, UT	TWOG (PPZUAV)	January 2009	Building 72" Flying Wings which will be used for remote sensing. Routine autonomous flight.
USU OSAM-UAV	Logan, UT	TWOG (PPZUAV)	June 2007	2x72" 5x48" 1x60" Flying Wings. Research backyard for AggieAir Remote Sensing. Routine autonomous flight.
CSU Fuel Cell UAV	Fort Collins, Co	Tiny 2.11 + LEA-5H (PPZUAV), 2.4Ghz XBPro	Mar 2009	Maiden flight complete Feb 28. New Airframe in development.
Armen Gharibans	La Jolla, California	Tiny2.11 (PPZUAV)	March 2009	UCSD Project with Multiplex Mentor. Completed August 2, 2009. Several Successful Auto2 Flights. A LOT of help from David Conger.
New User	1	2	3	4

Central America

Name	Location	Hardware	Joined	Current activities / project status
Joekadet	David Panama'	Tiny v2.11/LEA-4P, RF Modems XBee Pro 2.4 GHz (PPZUAV). Multiplex Mentor	2008	Seven flights now. Flights 6 & 7 in Auto2. Now only a matter of fine tuning.
New User	1	2	3	4

Australia

Name	Location	Hardware	Joined	Current activities / project status
Todd Sandercock	Adelaide, SA	Tiny v2.11, Multiplex Twinjet, 9Xtend modems	Jan 2008	Completed successful flight testing. Now designing new airframe.
Reuben Brown	Gawler, SA	Tiny v2.11	May 2009	Getting the autopilot set up
Bernard Davison	Neutral Bay, NSW	Tiny v2.11, Vertical + Horizontal IR sensors, XBee PRO modems, Futaba T6EXAP TX, Futaba R136F RX, Funjet, MacBook laptop	August 2008	Configuring before first flight.
Chris Gough	Canberra	TWOG v2.11, EZ*	September 09	not yet airborn

Africa

Name	Location	Hardware	Joined	Current activities / project status
W1th	South Africa KZN	TWOG V1 ,LEA-5H GPS , RF Modems XBee Pro 868 (CheBuzz)	July 2009	New to this , Got TWOG,GPS etc interfacing with Laptop and working ..Made a website SCARF of my struggle ...