Difference between revisions of "Lisa/S"
Jump to navigation
Jump to search
m (→Lisa/S: enhancements) |
|||
| Line 6: | Line 6: | ||
== Lisa/S == | == Lisa/S == | ||
Lisa/S is a | Lisa/S is a very small general purpose autopilot. The main goal of creating an autopilot of minimal size and weight, while providing a lot of functionality is achieved: | ||
* '''Size: 20mm x 20mm x 5mm (0.787" x 0.787" x 0.197")''' | |||
* '''Weight: 2.8g (0.1oz)''' | |||
=== Features === | === Features === | ||
| Line 32: | Line 35: | ||
[[Image:Lisa_s_v0_1_r2_top_superbit.jpg|300px]] | [[Image:Lisa_s_v0_1_r2_top_superbit.jpg|300px]] | ||
[[Image:Lisa_s_v0_1_r2_bottom_superbit.jpg|300px]] | [[Image:Lisa_s_v0_1_r2_bottom_superbit.jpg|300px]] | ||
So if you are ready to make your tiny plane fly autonomously,[http://1bitsquared.com/collections/frontpage/products/lisa-s you can already order one here] | |||
== Pinout == | == Pinout == | ||
Revision as of 08:59, 28 August 2013
Lisa/S
Lisa/S is a very small general purpose autopilot. The main goal of creating an autopilot of minimal size and weight, while providing a lot of functionality is achieved:
- Size: 20mm x 20mm x 5mm (0.787" x 0.787" x 0.197")
- Weight: 2.8g (0.1oz)
Features
- 72MHz 32bit ARM Cortex M3 MCU with 16KB RAM and 512KB Flash
- Combined 3 Axis Gyroscope and 3 Axis Accelerometer
- 3 Axis Magnetometer
- Barometer (Altimeter)
- U-Blox GPS
- Pads for Superbit CYRF module
- Switching buck/boost converter allowing wide range of power input making it perfect and stable for operation from a 1S LiPO cell.
- 2 MOSFET switches connected to PWM output channels
- 6 PWM outputs
- 1 debug UART port
- 1 CAN interface
- 1 Bind/Boot tact switch
- SWD programming/debugging interface
- Size: 20mm x 20mm x 5mm (0.787" x 0.787" x 0.197")
- Weight: 2.8g (0.1oz)
Pictures
So if you are ready to make your tiny plane fly autonomously,you can already order one here
Pinout
TODO
Block Diagrams
TODO
Schematics
