Difference between revisions of "Lisa/S"

Revision as of 12:46, 13 August 2013

Lisa/S is a micro footprint general purpose autopilot. The main goal is size and weight, while providing a lot of functionality.

72MHz 32bit ARM Cortex M3 MCU with 16KB RAM and 512KB Flash
Combined 3 Axis Gyroscope and 3 Axis Accelerometer
3 Axis Magnetometer
Barometer (Altimeter)
U-Blox GPS
Pads for Superbit CYRF module
Switching buck/boost converter allowing wide range of power input making it perfect and stable for operation from a 1S LiPO cell.
2 MOSFET switches connected to PWM output channels
6 PWM outputs
1 debug UART port
1 CAN interface
1 Bind/Boot tact switch
SWD programming/debugging interface
Size: 20mm x 20mm x 5mm
Weight: ~2g (need a more accurate scale Esden 00:14, 3 August 2013 (UTC))

TODO

TODO

TODO

Revision as of 18:16, 2 August 2013 (view source) Esden (talk \| contribs) ← Older edit		Revision as of 12:46, 13 August 2013 (view source) Microuav (talk \| contribs) Newer edit →
Line 1:		Line 1:
			[[File:tudelft_logo.jpg\|left\|150px\|link=http://tudelft.nl/en/]]
	[[Image:Lisa S V0 1 r2 on finger.jpg\|300px\|right]]		[[Image:Lisa S V0 1 r2 on finger.jpg\|300px\|right]]