Difference between revisions of "Tiny GPS config"
Jump to navigation
Jump to search
m (moved GPS CONFIG to Tiny GPS config) |
|||
| (11 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
Prerequisites: | Prerequisites: | ||
<ol> | <ol> | ||
<li>Must have loaded USB Boot Loader software | <li>Must have loaded [http://paparazzi.enac.fr/wiki/USB_Boot_Loader USB Boot Loader] software | ||
<li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"] | <li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"] | ||
<li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center] | <li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center] | ||
| Line 8: | Line 8: | ||
Required Cables: | Required Cables: | ||
<ol> | <ol> | ||
<li>FTDI Serial Adapter Cable | <li>[[Image:Ftdicbl.jpg|32px]]FTDI Serial Adapter Cable | ||
<li>8-pin Molex Picoblade connector to 6-pin FTDI cable | <li>[[Image:Gpscbl1.jpg|32px]]8-pin Molex Picoblade connector to 6-pin FTDI cable | ||
</ol> | </ol> | ||
Steps: | Steps: | ||
<ol> | <ol> | ||
<li>Connect FTDI | <li>Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop | ||
<li>Connect 8-pin Molex to "serial1" on Tiny2.11 | <li>Connect 8-pin Molex to "serial1" on Tiny2.11 | ||
<li>Power on Tiny2.11 | <li>Power on Tiny2.11 | ||
<li>Start u-center application | <li>Start u-center application | ||
<li>set connection | <li>set connection 'baudrate' to 9600BPS (LEA-4P factory default) | ||
<li>Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded) | <li>Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded) | ||
<li>Click File >> GPS button to send the file to the GPS | <li>Click File >> GPS button to send the file to the GPS | ||
<li>About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish | <li>About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish | ||
</ol> | </ol> | ||
[http://paparazzi.enac.fr/wiki | [http://paparazzi.enac.fr/wiki/Tiny_v2#Programming BACK] | ||
[[Category:User_Documentation]] | |||
Latest revision as of 04:41, 28 September 2013
Prerequisites:
- Must have loaded USB Boot Loader software
- Must have loaded "tunnel"
- Must have downloaded and installed u-center
- Must have downloaded, uncompressed the LEA-4P config file
Required Cables:
FTDI Serial Adapter Cable
8-pin Molex Picoblade connector to 6-pin FTDI cable
Steps:
- Connect FTDI Cable + 8-pin Molex adapter to USB on your laptop
- Connect 8-pin Molex to "serial1" on Tiny2.11
- Power on Tiny2.11
- Start u-center application
- set connection 'baudrate' to 9600BPS (LEA-4P factory default)
- Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
- Click File >> GPS button to send the file to the GPS
- About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish