Difference between revisions of "Setting up simulation environment"
Jump to navigation
Jump to search
m (moved Setting up simulation enviroment to Setting up simulation environment: Spelling error) |
|||
| Line 1: | Line 1: | ||
This page will guide you step-by-step through the process of setting up an environment to simulate the AR.Drone 2. | This page will guide you step-by-step through the process of setting up an environment to simulate the AR.Drone 2 controlled by Paparazzi. | ||
==Linux== | |||
This section will describe how to set up the simulation environment in Linux. It has been tested using Ubuntu, but it should work under any recent distro. | |||
*Install the ground station. See [[Installation]]. | |||
*Install JSBSim. See [[JSBSim]]. | |||
*Install Flightgear and link it to Paparazzi. See [[Simulation#View_the_simulation_in_Flight_Gear]]. | |||
Revision as of 03:45, 15 November 2012
This page will guide you step-by-step through the process of setting up an environment to simulate the AR.Drone 2 controlled by Paparazzi.
Linux
This section will describe how to set up the simulation environment in Linux. It has been tested using Ubuntu, but it should work under any recent distro.
- Install the ground station. See Installation.
- Install JSBSim. See JSBSim.
- Install Flightgear and link it to Paparazzi. See Simulation#View_the_simulation_in_Flight_Gear.