Search results

• CSUBlog
  ...The second Paparazzi autopilot was received and an airframe file has been started for the new plane. (Nick)
  429 bytes (70 words) - 18:21, 9 March 2011
• General/Index
  *[[Getting_Started|Getting Started]]<br><small>An overview of getting started with Paparazzi</small>
  759 bytes (113 words) - 18:33, 19 January 2016
• GPSd position
  ...interface to the receiver. On some Linux distributions the gpsd daemon is started automatically by default (e.g. Ubuntu 9.10) and might confuse the modem ope ...o the ivy bus so that the gcs can display it is called gpsd2ivy. It can be started through the '''GPSd position display''' in the Paparazzi Center Tools bar.
  3 KB (567 words) - 10:27, 11 November 2014
• TU Delft - Autonomous Quadrotor
  ...r. B. D. W. Remes.] The initial objective of both teams is similar, namely getting the AR Drone v2.0 to fly using the Paparazzi Software. However the path tak ...d by Paparazzi, there is a [[AR_Drone_2/getting_started|AR-Drone 2 getting started]] Page. This page will guide you through that process step by step.
  3 KB (482 words) - 14:03, 16 June 2013
• Paul Cox Notes
  ...yo/MTIG box/mounting cage || Build at Bertrand's place or ENAC || x || Not started ...apability || one of the checked in enac flight plans does this || x || not started
  13 KB (1,576 words) - 03:05, 6 April 2011
• Tutorials
  {{#ev:youtube|EkCLD8CUc2w|200|left}} [[Lisa/S]] Nano Quadcopter Getting Started - Video by the [http://mavlab.lr.tudelft.nl/ TU Delft MAVLab] {{#ev:youtube|eojAPZvT1Ck|200|left}} AR Drone Getting Started - Video by the [http://mavlab.lr.tudelft.nl/ TU Delft MAVLab]
  6 KB (887 words) - 15:48, 13 May 2016
• TU Delft - Lasergame with Autonomous AR Drone
  ...llows multiple people to work on the same project at the same time without getting in eachother's way. It is in this case very useful and we will use Github, ...ill then begin counting down, which means the player needs to move or risk getting hit by the virtual explosion of the AR.Drone
  7 KB (1,178 words) - 04:30, 28 November 2017
• Twoga-Logga
  ...to the standard .data and .log file with a Paparazzi tool. Logging can be started again through a long press of the button if USB was not connected.
  2 KB (346 words) - 09:29, 19 November 2015
• SDLogger SPI Direct
  ...and insert the SD card into the board. In this case the logging should be started/stopped over the 8th channel of your radio control (set the proper switch o
  2 KB (390 words) - 07:55, 28 November 2017
• SuperbitRF
  ...or not, and each transmitter is sending at a different timing. This is why getting the timing right is so difficult. == Getting started ==
  9 KB (1,518 words) - 06:01, 5 August 2015
• Module/FlightBenchmark
  The measurement is not started until about the variable benchm_go is set to 1.
  4 KB (537 words) - 14:57, 7 March 2012
• RT Paparazzi
  The development of RT Paparazzi with ChibeOS was started by the AggieAir team [http://aggieair.usu.edu/] at Utah State University. == Getting the sourcecode ==
  6 KB (954 words) - 08:45, 27 June 2016
• ADS-B
  dump1090 is then started with the --net option to open a server supplying the information on port 30
  3 KB (473 words) - 04:01, 8 November 2015
• Installation/BeagleBoneBlack
  ...tform for developers and hobbyists. Boot Linux in under 10 seconds and get started on development in less than 5 minutes with just a single USB cable.
  3 KB (494 words) - 11:28, 7 February 2015
• TU Delft - Search and Rescue with AR Drone 2
  ...llows multiple people to work on the same project at the same time without getting in each other's way. So all files associated with our project associated ca ...xtracted from the AR Drone2. So this data could be fed to paparazzi. So we started with trying to connect and pass files to the AR Drone2, which is desribed i
  8 KB (1,237 words) - 05:03, 28 November 2017
• Docker
  In particular, if you're just getting started using Docker with Paparazzi, we encourage you to make use of the following ...http://docs.docker.com/linux/started/ Linux] / [http://docs.docker.com/mac/started/ Mac].
  4 KB (629 words) - 04:09, 10 March 2016
• DevGuide/GDB OpenOCD Debug
  One Example from [http://docs.armstrap.org/en/latest/getting-started-eclipse-development-tools.html| armstrap] ...n set some initialization commands in ~/.gdbinit that will run when gdb is started, improving workflow.
  7 KB (1,208 words) - 04:31, 14 April 2015
• AR Drone 2/NAV board
  ...does not give a lot of information, but does give us an indication to get started.
  3 KB (502 words) - 05:46, 21 January 2013
• Pprzros
  ...erial or Ivy) and a ''Destination'' (plus some other optional infos). Once started the PPRZROS node will create two ROS topics:
  6 KB (898 words) - 08:20, 31 July 2017
• Xvert
  = Getting started =
  4 KB (564 words) - 15:46, 12 March 2019

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)