Explorer/RaspberryPi/Wifibroadcast

The software installation should be done on board (Airpi) and ground (Groundpi) RaspberryPi

sudo apt-get install libpcap-dev libsodium-dev -y

git clone https://github.com/svpcom/wifibroadcast
mv wifibroadcast wifibroadcast-svpcom 
cd wifibroadcast-svpcom
make

Don't worry with error (/bin/sh: 1: trial: not found make: *** [Makefile:43: test] Error 127)

The Wifibroadcast build process, generates two files used to encrypt transmitted data:
drone.key & gs.key, must be the same on Airpi and Groundpi.

cd /opt/vc/src/hello_pi/libs/ilclient
make
cd
git clone https://github.com/svpcom/wifibroadcast_osd.git
cd wifibroadcast_osd/fpv_video
make
 

• Airpi and GroundPi

/etc/wpa_supplicant/wpa_supplicant.conf
"
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=FR
network={
 ssid="Androidxp"
 psk="pprzpprz"
}
network={
 ssid="pprz_router"
 key_mgmt=NONE
}
"

For maintenance purpose:

• wlan0 should be enable (#denyinterfaces wlan0) to connect through hotspot
• wlan0 should can be disable (denyinterfaces wlan0) if the Groundpi can be connected with ethernet
• wlan1 should be disable (denyinterfaces wlan1) to be used by wifibroadcast

/etc/dhcpcd.conf
"
#denyinterfaces wlan0
denyinterfaces wlan1
"
"
denyinterfaces wlan0
denyinterfaces wlan1
"

/etc/dhcpcd.conf
"
# It is possible to fall back to a static IP if DHCP fails:
# define static profile
profile static_eth0
static ip_address=192.168.3.2/24
static routers=192.168.3.1
static domain_name_servers=192.168.3.1
# fallback to static profile on eth0
interface eth0
fallback static_eth0
"

/etc/rc.local
"su root -c /home/pi/wfbnet.sh &"
/home/pi/wfbnet.sh
chmod ugo+xwr /home/pi/wfbnet.sh
"
#!/bin/bash
ifconfig wlan1 down
sleep 1
iw dev wlan1 set monitor otherbss
iw reg set DE
ifconfig wlan1 up
iw dev wlan1 set channel 36
iw dev wlan1_DEV set txpower fixed 4000
#iw wlan1 info
"
 

• Airpi

UDP packet received on port 5600 are send to wlan1 (wifibroadcast) using channel 1

/home/pi/wfbnet.sh
" 
/home/pi/wifibroadcast-svpcom/wfb_tx -K /home/pi/wifibroadcast-svpcom/drone.key -p 1 -u 5600 wlan1
"

• Groundpi

Data received on wlan1 (wifibroadcast) and channel 1 are UDP send locally on port 6500

/home/pi/wfbnet.sh
"
/home/pi/wifibroadcast-svpcom/wfb_rx -K /home/pi/wifibroadcast-svpcom/drone.key -p 1 -c 127.0.0.1 -u 6500 wlan1
"

Explorer/RaspberryPi/Wifibroadcast/Integration