Difference between revisions of "User:Rufus"

From PaparazziUAV
Jump to: navigation, search
m (Chanel 5 on Spektrum DX5i won't mod to 3 position switch :/)
(Current project: Lisa/M Quad)
Line 17: Line 17:
I mostly fly fixed-wing foam planes with Twogs/Tinys and IR;
I mostly fly fixed-wing foam planes with Twogs/Tinys and IR;
= Current project: Lisa/M Quad =
I am currently gathering parts for a my first Quad project, which also be my first foray into STM32 paparazzi. So far, I have accumulated:
* Lisa/M with Asprin (yay!) and a JTag thingy.
* orderd a [http://www.hoverthings.com/catalog/ VC-450] quad frame, expect to have it soon.
* These [http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=121 1000 Kv motors], these [http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=146 30A ESCs], and these [http://www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=527 12 pairs or 10" * 4.5" counter rotating props]. I have no idea if these are any good, or even if they are fit for purpose, I only know they cheap.
* 2 Orange DSM2 satellite receivers from HobbyKing
* 900Hz xbees (international firmware, 915-928 MHz and power limited to fit withing the Australian ISM class licence)
* a new design NEO-6Q GPS (will fall back to a LEA-5H if this creates problems), etc
* plenty of lipos, picoblade bits and pieces, LEDs, etc.
anticipated AUW ~1kg.
The powertrain spec is similar to what most of the VC-450 setups on the RC Groups thread have, but I suspect that (on 3S lipos) those motors/ESCs will be slightly under-propped. My main concern is that the controllers won't be fast enough, expect I may need to replace them with something better, but given the size of this model it might be OK to run them a little slower. The props feel quite flimsy and I will certainly be balancing them well before I use them.
I still need to acquire a DSM2 transmitter, probably a JR module for a Turnigy 9X.
My plan is to build a robust and strait-forward quad, then learn to fly it. After that, I'd like to switch to 36 MHz PPM control (like my planes) or fly by joystick to free up 2.4 GHz for analog video. Then I'll probably move on to a smaller bespoke frame, I guess.

Revision as of 16:22, 1 November 2012

Aerofu logo.png

I'm a paparazzi enthusuiast from Canberra (Australia) and the guy behind aerofu.com.

Who is this rufus character ?

  • My name is Chris Gough, some people call me rufus (for reasons I don't fully understand).
  • the best way to reach me is christopher (dot) d (dot) gough (at) gmail.com.
  • my skype identity is christopher.d.gough, but it's not a good way to reach me.
  • I rabble-rouse on GitHub as monkeypants.
  • my eBay persona is monkeypants007.
  • my phone number is (+61) 418441605 (a mobile).

I'm NOT this guy:

I mostly fly fixed-wing foam planes with Twogs/Tinys and IR;