Lisa USB

From PaparazziUAV
Revision as of 11:47, 26 August 2010 by Paulcox (talk | contribs) (→‎Host)
Jump to navigation Jump to search

List of tested devices

TODO: Put all of this in a nice pretty table

Overo version, Lisa version, Interface, USB device ID, Driver, Driver Ver, Kernel Ver, Issues, Performance, Notes

OTH with Hub

edimax wifi - functional, netperf shows 13Mbps throughput to a PC also on wifi mass storage stick - works , read: 68Mbps write: 6.6Mbps

OTG direct

edimax wifi - non-functional rt3070 driver doesn't create an ra0 apparently it's because there's not enough power:

usb 1-1: new high speed USB device using musb_hdrc and address 2
usb 1-1: default language 0x0409
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=7392, idProduct=7711
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: 802.11 n WLAN
usb 1-1: Manufacturer: Ralink
usb 1-1: SerialNumber: 1.0
usb 1-1: usb_probe_device
usb 1-1: rejected 1 configuration due to insufficient available bus power

mass storage stick - works , read: 66Mbps write: 6.8Mbps

Host

edimax wifi - functional, netperf shows 11Mbps throughput to a PC also on wifi mass storage stick FireFly - works , read: 130Mbps write: 6.8Mbps HTC Desire phone, Android 2.1, orange network (shows up as usb0, "dhclient usb0" gets it set up)

Notes

Lisa v1.0-r1 Overo old one kernel 2.6.33.5-rt23 driver rt3070sta idVendor=7392, idProduct=7711

Bus 001 Device 003: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly RevF 4GB (FAT formatted)

file transfer performance test method

write: dd if=/dev/urandom of=/mnt/filename bs=8192 count=1k
read: cat /mnt/filename > /dev/null