Booz/HardwareTest

From PaparazziUAV
(Redirected from BoozHardwareTest)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

The Makefile for those is in conf/autopilot/booz2_test_progs.makefile


test_downlink

Paparazzi's Makefile allow you to build different TARGETS (aka programs) using a doted notation. The begining of the Makefile reads

 #
 # test downlink
 #
 test_downlink.ARCHDIR = $(ARCHI)
 test_downlink.ARCH = arm7tdmi
 test_downlink.TARGET = test_downlink
 test_downlink.TARGETDIR = test_downlink
 #
 test_downlink.CFLAGS += -DBOARD_CONFIG=$(BOARD_CFG) $(BOOZ_CFLAGS)
 test_downlink.CFLAGS += -DPERIPHERALS_AUTO_INIT
 test_downlink.srcs   += $(SRC_BOOZ_TEST)/booz2_test_downlink.c
 test_downlink.CFLAGS += -DUSE_LED
 test_downlink.CFLAGS += -DPERIODIC_TASK_PERIOD='SYS_TICS_OF_SEC((1./10.))' -DTIME_LED=1
 test_downlink.srcs   += sys_time.c $(SRC_ARCH)/sys_time_hw.c $(SRC_ARCH)/armVIC.c
 #
 test_downlink.CFLAGS += -DUSE_UART1 -DUART1_BAUD=B57600
 test_downlink.srcs   += $(SRC_ARCH)/uart_hw.c
 #
 test_downlink.CFLAGS += -DDOWNLINK -DDOWNLINK_TRANSPORT=PprzTransport -DDOWNLINK_DEVICE=Uart1 
 test_downlink.srcs   += downlink.c pprz_transport.c

FIXME: More on this when syntax highlighting/line numbering works

The command line to compile the "test_downlink" target for the BOOZ2_A1 aircraft would be

make AIRCRAFT=BOOZ2_A1 test_downlink.compile

and to upload this program to your board ( you don't really need to type the previous command, make is smart and will compile your program if needed when you ask him to upload it )

make AIRCRAFT=BOOZ2_A1 test_downlink.upload


test_max1168

the max1168 is the 16 bits analog to digital converter chip used on the IMU to sample gyros and accels.

make AIRCRAFT=BOOZ2_A1 test_max1168.upload