File:Tiny13wIMU 001.jpg

From PaparazziUAV
Revision as of 21:29, 9 November 2010 by Dconger (talk | contribs) (Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Tiny13wIMU_001.jpg ‎(640 × 478 pixels, file size: 41 KB, MIME type: image/jpeg)

Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:14, 8 January 2014Thumbnail for version as of 03:14, 8 January 2014640 × 478 (41 KB)Maintenance script (talk)Importing file
21:29, 9 November 2010No thumbnail640 × 478 (41 KB)Dconger (talk | contribs)Photo showing how I wired up an ArduIMU to a Tiny13 autopilot. I would have used a TWOG instead but had zero room inside the Multiplex Merlin. 5v and ground from a servo connector and the two I2C wires from the serial1 connector.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=File:Tiny13wIMU_001.jpg&oldid=8046"