Paul Cox Notes

Sept 30

using joystick:

running the test program you can see which buttons do what:

~/paparazzi3/trunk/sw/ground_segment/joystick$ ./test_stick 
Available button: 288 (0x120)
Available button: 289 (0x121)
Available button: 290 (0x122)
Available button: 291 (0x123)
Available button: 292 (0x124)
Available button: 293 (0x125)
Available button: 294 (0x126)
Available button: 295 (0x127)
Available button: 296 (0x128)
Available button: 297 (0x129)
Available button: 298 (0x12a)
Available button: 299 (0x12b)
Available axis: 0 (0x0)
Available axis: 1 (0x1)
Available axis: 2 (0x2)
Available axis: 5 (0x5)
Available axis: 16 (0x10)
Available axis: 17 (0x11)
Available axis: 40 (0x28)
Axis 0 : parameters = [0,255]
Axis 1 : parameters = [0,255]
Axis 2 : parameters = [0,255]
Axis 3 : parameters = [0,255]
Axis 4 : parameters = [-1,1]
Axis 5 : parameters = [-1,1]
Axis 6 : parameters = [0,255]
Input device name: "GreenAsia Inc.    USB Joystick     " on device "/dev/input/event6"


buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 87 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 20 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 69 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 111 48 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 127 -64 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -127 32 -127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -127 -39 -69 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 -117 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 -127 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 40 -35 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 49 127 127 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 127 127 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -53 127 127 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 8 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 127 84 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 -66 0 0 0 0 127 0 0 0
buttons 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 | axis -127 0 0 0 0 0 127 0 0 0
buttons 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 127 0 0 0 0 127 0 0 0
buttons 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 | axis 47 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 59 127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -105 -127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis -78 -127 0 0 0 0 127 0 0 0
buttons 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 -99 0 0 0 0 127 0 0 0
buttons 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | axis 0 0 0 0 0 0 127 0 0 0

Then creating an xml configuration file:

paul@ledelle:~/paparazzi3/trunk/sw/ground_segment/joystick$ medit attack3_booz_nav.xml

and now running the application:

export PAPARAZZI_HOME=/home/paul/paparazzi3/trunk
paparazzi3/trunk/sz/ground_segment/joystick/input2ivy -ac TJOVERO ngs_set_actuators.xml

running ivyprobe we can see the message getting transmitted:

paul@ledelle:~/paparazzi3/trunk/sw/ground_segment/joystick$ ivyprobe '(.*)'

shows:

Paparazzi joystick sent  'input2ivy SET_ACTUATOR 1496 2 3'

but we have to make sure the server knows this message needs to be forwarded: in messages.xml the message should be labeled as "forwarded" :

 <message name="SET_ACTUATOR" id="100" link="forwarded">
   <field name="value" type="uint16"/>
   <field name="no" type="uint8"/>
   <field name="ac_id" type="uint8"/>
 </message>