Alpha esc with telemetry output

Alpha ESC with telemetry output

About

• Low Noise , Temperature and Interference
• Fast Response , High Efficiency
• Match U3 KV700 , U5 KV400 , MN5212 KV340 , MN7005 KV230 Only

Specs

Add more text as we come across...

Throttle Loss Protection

Multiple Protections f‘ Motor Lock-u overcunfiem “ if“) 343,35;- Pr te t' p Intelligent design enables Protection 0 C “w. . “a m.- w ALPHA ESC to timely detect Q i ‘” parameters as to voltage. Y " Y current and temperature etc. i ‘ w l A ESC will carry out adjustment 4 1 l l l, u and interference upon abnormality. thus helps prolong the life span.

Short Circuit Low Voltage Protection Protection

Telemetry

A module surptisingly called "Alpha ESC" is available to read the data. Read the documantation via Doxygen or a bit, maybe autdate here

• The Black and White cable is regular servo connector with PWM to control ESC speed output
• Yellow cable not used (pulses for RPM) atm,
• Black, red and White cable is serial data, Black to GND and White cable must be connected to the serial rx port on the autopilot. diisconnect the red

An example to ad to your airframe:

<module name="esc_alpha">
  <configure name="ALPHA_ESC_PORT" value="UART5"/>
  <configure name="ALPHA_ESC_BAUD" value="19200"/>
</module>

wire it up

Messages

To get this there is no universal ESC messageclass (Yet) in use for this. Would be nice if someone would alter and add this...(AKA open source)