Eagle Tips

Printing Schematics, PCBs, and BOMs from Eagle

These instructions are so far to reflect Windows Version as the author did not have access to the Linux version at the time of writing.

Printing Schematic

Paparazzi schematics were drawn to print on an A4 sheet which is 210mm x 297mm (8.26in x 11.7in). North America uses the Letter size of 8.5in x 11in and will print fine onto two Letter sheets but it is more convenient to print onto a single Letter sized sheet. Below are instructions to do this.

With the schematic open go to File -> Print and you will see the print dialog

UNDER STYLE

ROTATE, BLACK, SOLID

Scale Factor: 0.65 Page Limit: 0

SHEETS

This (x/2)