User:Marc

About me

• Location: Stuttgart, Germany
• PhD student in aerospace engineering
• RC flying for many years, Paparazzi since 2008

Planes equipped with Paparazzi

Private

• Easystar
  • Using standard brushed motor with 3S Lipo, no problems after many flight hours.
  • Rudder is enlarged for better control.
  • Tiny V2

• FunJet
  • Not flown yet (16:55, 18 February 2010 (CET))

General info

Easystar with sensors

For the university

UAV at university of stuttgart (Sorry, only german for now. Will add page here)

• Easyglider Pro
  • Gain of 4000m altitude in one flight DIY-Drones Contest
  • Tiny V2
• Trainer
  • Wingspan 3,3m; 2kW motor; 10S2P Lipo; 12 kg
  • Used for pilot training and payload testing
  • Tiny V2
• Adler 1
  • Wingspan 4,3m; 2x2kW motor; 2x10S2P Lipo; maximum take off 25kg (for legal reasons)
  • Used for aerial imaging and remote sensing
  • Twog
• Adler 2
  • Similar to Adler1, lightweight structure for the fuselage
  • Manual flights performed, Paparazzi system implemented but not tested due to bad weather (16:55, 18 February 2010 (CET)).
  • Twog

Easyglider Pro

Adler1 ready for lift off

Hardware

• SD-Card data logger
  • Intention as Data Logger and compatible but based on Atmel (cheaper and more familiar to me)
  • Description and files to be released when tested

• GCS on EEEPC 900 running Debian Linux from SD-Card DebianEeePC

SD logger top

SD logger bottom

EEEPC running GCS