User:HWal
Paparazzi electronics for sale
I own too much Paparazzi UAV equipment. If someone would be interested in the items below, I have split them into three bundles. The Lisa/M v2.0 and Elle0 bundles have been tested to work properly (see photos and videos). Because of this I do not want to sell any of these as individual components. In Bundle 3, all items have been tested individually except from the blue PWM to PPM board. If you are interested, please email me at helgewal@gmail.com
Bundle 1.
1 Lisa/M v2.0 autopilot with Aspirin v2.1 IMU. Bought with a Quadshot from Transition Robotics. It has only been hovered barely above ground for a very short time (a minute or so). It was then moved to a Multiplex Funjet which was only tested on the bench and never flown.
Note: To get data from the onboard barometer via I2C, the 4.7k pullups R1 and R2 have been removed, and the jumpers JP4 and JP5 have been closed.
1 pair of XBee PRO S1 modems with adapters. The ground station modem has been placed in a small plastic casing.
1 GPS Drotek NEO M8N.
Videos (sorry for the poor quality):
Build firmware and upload: https://youtu.be/iGpmYqewWdo
Ground Control Station: https://youtu.be/-f7St6Z28zU
Postage from Norway to abroad is regretfully quite expensive at USD 20. If I can remove, and not send, the USB cable and the plastic modem casing, postage will be USD 12. Both alternatives include packing as unregistered letter in a cardboard box.
If you are interested, please send me an offer on helgewal@gmail.com. I am sorry I do not accept offers below USD 70 + postage.
The buyer is responsible for checking the legality of importing this kind of equipment into his / her country.
The items are sold as-is, though they have been very carefully handled.
Electronics:
Bundle 2.
1 Elle0 autopilot. Bench tested, never installed in aircraft. Purchased from Transition Robotics.
1 pair of XBee PRO Series 2 modems with adapters. The ground station modem has been placed in a small plastic casing.
1 GPS ublox NEO-6M. Not top of the line, it needs to be placed a bit away from the autopilot to get proper reception.
1 Voltage divider for measuring battery voltage on 3S Lipo. See schematic.
Videos (sorry for the poor quality):
Build firmware and upload: https://youtu.be/C-Sj0XW-1ps
Ground Control Station: https://youtu.be/pGSeS8SHQIQ
Postage from Norway to abroad is regretfully quite expensive at USD 20. If I can remove,and not send, the USB cable and the plastic modem casing, postage will be USD 12. Both alternatives include packing as unregistered letter in a cardboard box.
If you are interested, please send me an offer on helgewal@gmail.com. I am sorry I do not accept offers below USD 45 + postage.
The buyer is responsible for checking the legality of importing this kind of equipment into his / her country.
The items are sold as-is, though they have been very carefully handled.
Electronics:
Connection diagram:
Bundle 3.
2 PWM to PPM converters for 8 channels. To be used if there is no PPM signal available.
1 R/C receiver Robbe R6107SP with PPM output only. Never flown in aircraft.
1 GPS ublox NEO-6M.
1 SPK GPS LEA-5H 3.3V.
1 pair of XBee S1 modems with adapters.
Postage from Norway to abroad is USD 12. This includes packing as unregistered letter in a cardboard box.
If you are interested, please send me an offer on helgewal@gmail.com. I am sorry I do not accept offers below USD 30 + postage.
The buyer is responsible for the legality of importing this kind of equipment into his / her country.
The items are sold as-is, though they have been very carefully handled.
Electronics:
