File:LisaMX v2 0 DFU.jpg
Original file (1,938 × 1,647 pixels, file size: 512 KB, MIME type: image/jpeg)
Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL.
The two pairs of pins circled in red should be shorted (VERY CAREFULLY) as shown, i.e.: 1) The Boot0 and VDD pins on the STM32F4 should be shorted together. 2) The ACC_DRDY (Boot1) and GND pins should be shorted together on the Aspirin mounting pads. (This can be done even if an aspirin IMU is mounted).
The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using DFU-UTIL. Tested functional on a TRI Lisa/M v2.0 using Paparazzi Master branch on 18 Nov 2014.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:22, 18 November 2014 | | 1,938 × 1,647 (512 KB) | Psinha (talk | contribs) | Lisa/MX bootloader entry technique for programming via USB - DFU_UTIL. The two pairs of pins circled in red should be shorted as shown. The USB connector should then be plugged in. This action also powers the board. The board can then be flashed using ... |
You cannot overwrite this file.
File usage
The following page uses this file:
