Builds/Tests
Automated testing
There are a number of automated tests that can be run from the command line from the top level Paparazzi directory:
make test: runs test_math and test_examplesmake test_math: test math libmake test_examples: test compiles all aircrafts/targets in conf/conf_tests.xmlmake test_all_confs: test compiles all confs, i.e. all aircrafs found in all conf files found byfind_confs.py
To test compile all aircrafts in one specific conf file:
CONF_XML=conf/conf_personal.xml prove tests/examples/
If you require more verbose output of the results run the command make test TEST_VERBOSE=1
The test results can also be generated in JUnit format adding the option JUNIT=1 to the command line i.e. make test JUNIT=1 or make test TEST_VERBOSE=1 JUNIT=1
JUnit formatting of test resuls requires that the Perl module TAP::Formatters::JUnit is installed on the machine that the tests are run on. Please see installing Perl modules for more details
Hardware tests
The hardware testing is executed using the Perl test framework.
To implement the hardware testing we need do the following
- Build the firmware
- Upload the firmware to the target board noting that multiple boards may be connected to the same computer
- Start up the server program
- Start up the link program
- Run the test suite by reading and writing data to the Ivy bus.
- Stop the server and link processes
The Perl module IO::Socket::Multicast is required to be installed to be able to execute the hardware tests. Please see installing Perl modules for more details
To execute the hardware tests run the command make test TEST_HARDWARE=1
Installing Perl modules
On Ubuntu/Debian simply
apt-get install libio-socket-multicast-perl libtap-formatter-junit-perl
To install Perl modules directly from CPAN the following procedure can be run.
- sudo perl -MCPAN -e shell
- install <module name>
This should install all of the required modules. note that errors may be reported during the installation process so you should pay attention to what is happening.