Difference between revisions of "User:Marc"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
**Rudder is enlarged for better control. | **Rudder is enlarged for better control. | ||
**Tiny V2 | **Tiny V2 | ||
**Now testbed for homebuilt paparazzi (see below) | |||
* '''FunJet''' | * '''FunJet''' | ||
| Line 61: | Line 62: | ||
|[[Image:EEEPPRZ.jpg|thumb|300px|EEEPC running GCS]] | |[[Image:EEEPPRZ.jpg|thumb|300px|EEEPC running GCS]] | ||
| | | | ||
|} | |||
*Homebuilt Paparazzi System | |||
**Based on the idea of [https://www.ismo.hs-bremen.de/dokuwiki/doku.php?id=elem:projekte:projekt19:pcb:intro Hochschule Bremen] using an [http://www.olimex.com/dev/lpc-h2148.html Olimex developement board] | |||
**Single layer pcb layout, produced with a CNC mill using [http://www.pcbgcode.org/ PCB-GCode] | |||
**Changed layout of infrared sonsors for easyser soldering and components available at my electronic retailer | |||
**Testflight today: success! (23:13, 24 February 2010 (CET)) | |||
**Not very efficient(7805...), light, small or beautiful, but it works | |||
**After some minor corrections files will be uploaded | |||
{| | |||
|[[Image:Plugged_in.jpg|thumb|250px| The "big TWOG" :-)]] | |||
|[[Image:Adapter_a.jpg|thumb|250px| pcb side]] | |||
|[[Image:IRsingle_Marc.jpg|thumb|300px| IR single sensor]] | |||
|[[Image:IRdual_Marc.jpg|thumb|300px| IR dual sensor]] | |||
|} | |} | ||
Revision as of 15:13, 24 February 2010
About me
- Name: Marc Schwarzbach
- Location: Stuttgart, Germany
- PhD student in aerospace engineering
- RC flying for many years, Paparazzi since 2008
Planes equipped with Paparazzi
Private
- Easystar
- Using standard brushed motor with 3S Lipo, no problems after many flight hours.
- Rudder is enlarged for better control.
- Tiny V2
- Now testbed for homebuilt paparazzi (see below)
- FunJet
- Not flown yet (16:55, 18 February 2010 (CET))
For the university
- UAV at university of stuttgart (Sorry, only german for now. Will add page here)
- Easyglider Pro
- Gain of 4000m altitude in one flight DIY-Drones Contest
- Tiny V2
- Trainer
- Wingspan 3,3m; 2kW motor; 10S2P Lipo; 12 kg
- Used for pilot training and payload testing
- Tiny V2
- Adler 1
- Wingspan 4,3m; 2x2kW motor; 2x10S2P Lipo; maximum take off 25kg (for legal reasons)
- Used for aerial imaging and remote sensing
- Twog
- Adler 2
- Similar to Adler1, lightweight structure for the fuselage
- Manual flights performed, Paparazzi system implemented but not tested due to bad weather (16:55, 18 February 2010 (CET)).
- Twog
Hardware
- SD-Card data logger
- Intention as Data Logger and compatible but based on Atmel (cheaper and more familiar to me)
- Description and files to be released when tested
- GCS on EEEPC 900 running Debian Linux from SD-Card DebianEeePC
- Homebuilt Paparazzi System
- Based on the idea of Hochschule Bremen using an Olimex developement board
- Single layer pcb layout, produced with a CNC mill using PCB-GCode
- Changed layout of infrared sonsors for easyser soldering and components available at my electronic retailer
- Testflight today: success! (23:13, 24 February 2010 (CET))
- Not very efficient(7805...), light, small or beautiful, but it works
- After some minor corrections files will be uploaded
