Difference between revisions of "Tiny GPS config"

From PaparazziUAV
Jump to navigation Jump to search
Line 2: Line 2:
<ol>
<ol>
<li>Must have loaded USB Boot Loader software
<li>Must have loaded USB Boot Loader software
<li>Must have loaded "tunnel"
<li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"]
<li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center]
<li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center]
<li>Must have downloaded, uncompressed the [http://paparazzi.enac.fr/wiki_images/Tiny_LEA-4P-v6.zip LEA-4P] config file
<li>Must have downloaded, uncompressed the [http://paparazzi.enac.fr/wiki_images/Tiny_LEA-4P-v6.zip LEA-4P] config file

Revision as of 19:41, 20 April 2008

Prerequisites:

  1. Must have loaded USB Boot Loader software
  2. Must have loaded "tunnel"
  3. Must have downloaded and installed u-center
  4. Must have downloaded, uncompressed the LEA-4P config file

Required Cables:

  1. FTDI Serial Adapter Cable
  2. 8-pin Molex Picoblade connector to 6-pin FTDI cable

Steps:

  1. Connect FTDI cable + 8-pin Molex adapter to USB on your laptop
  2. Connect 8-pin Molex to "serial1" on Tiny2.11
  3. Power on Tiny2.11
  4. Start u-center application
  5. set connection speed to 9600BPS (LEA-4P factory default)
  6. Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
  7. Click File >> GPS button to send the file to the GPS
  8. About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish

BACK