Tutorials

Various video tutorials of all kinds.

Lisa/S Nano Quadcopter

Building the Lisa/S Nano Quadcopter - Video by the TU Delft MAVLab

Lisa/S Nano Quadcopter Getting Started - Video by the TU Delft MAVLab

Piotr Esden-Tempski @ Hak5

Piotr gave a series of interviews at Hack5 in which he walks through most steps for setting up a Quadrotor with the Lisa/M V2.
The bumblebee_quad.xml airframe file is included in the default installation of paparazzi, and can be easily found in the default airframe paparazzi center dropdown as "Bumblebee_Quad".
This may be very helpful for beginners since a lot of important paparazzi related stuff is explained (but not all is required for a beginner).
The videos also contain some additional stuff which has nothing to do with paparazzi.

Open Source Drones and Android SDR, Hak5 1611

• Introduction to the terms Drones, UAV and UAS.
• Mechanical difference between quadcopter and helicopter, why the quadcopter is more common on hobbyists.
• Possible uses of UAV/UAS (non military).
• Safety guidelines (use your brain!, airports, other people...).

Drone Basics and Open Source Ship Tracking, Hak5 1612

• Quad, hexa and optocopters, which are the different benefits?
• Which parameters influence the propellers thrust(pitch, kV, V)?
• Short talks about brushed/brushless motors, frames, in this build used radio system and LiPo battery.
• Why a quadcopter can't be controled directly ba a human.

Drones 101: Flight Controllers + Tracking Aircraft 5000 miles away! Hak5 1615

• How does an autopilot work in principle and which are the minimum requirements for stabilisation e.g..
• MEMS; Gyroscope, Accelerometer & Magnetometer, Barometer, what they can measure and what the autopilot can do with these measurements .
• Different Flight controller; Paparazzi, DJI Naza, Ardupilot, Multiwii.
• Paparazzi over the time, which controller has been used in the past (AVR -> LPC -> STM32).

Drones 101: Open Source Autopilot, Hak5 1616

• LisaMv2 with Aspirinv2.2 small overview.
• Paparazzi center walkthough, from (left to right) the code parts, to compiling and uploading.
• How paparazzi is released on github (stable and cutting edge).
• What do the Airframe, Flight Plan, Settings, Radio and Telemetry xml files do?
• Build the firmware with gcc and upload it to LisaMv2.
• LisaMv2's Bootloader mode.
• GCS walkthough with the basic components.
• Connect LisaMv2 via Floss JTAG's uart port to the GCS.

Drone Assembly and Trunked Radio Systems, Hak5 1617

• Assembling the Bumblebee carbon fiber airframe.
• Zip tie down the ESC cables and mounting the LisaMv2.

Drone Wiring And Moving On From TrueCrypt With LUKS, Hak5 1618

• Connecting peripherals on the quadrocopter (BEC, redundant Spektrum, telemetry modem, gps receiver).
• Connect to a power source (limited power supply / LiPo).
• Binding the Spektrum satelites with a bind plug over the LisaMv2.

Finalizing The Drone and Text Obfuscation With FauxCrypt, Hak5 1619

• Connect quadcopter with GCS
• Intro to Messages, Real-time Plotter.
• Calibrating the accelerometer and magnetometer.
• Maiden flight.

Parrot Bebop

Paparazzi on the Parrot Bebop Drone - Video by the TU Delft MAVLab

AR Drone

AR Drone Getting Started - Video by the TU Delft MAVLab

AR Drone Autonomous Flight - Video by the TU Delft MAVLab

Other

Lisa/S/Tutorial/Nano_Quadcopter

Lisa/M/Tutorial/FixedWing

Lisa/M/Tutorial/RotorCraft

User/LisaL/Tutorial/Quadrocopter

Lisa_Asctec_Bringup