Installation/MacOSX

The task of building Paparazzi on for Apple MacOS X is on going.

The current installation instructions are as follows. As the process evolves and the more people begin to use it the process will become easier and more simplified.

Installing from source

1. Install the latest XCode http://developer.apple.com/technologies/tools/xcode.html
2. Install MacPorts from http://www.macports.org/install.php
3. Install GIT

   sudo port install git-core

4. Get a local copy of the Paparazzi Portability Support source

   git clone git://github.com/paparazzi/paparazzi-portability-support.git

5. edit /opt/local/etc/macports/sources.conf and above the rsync://... line add file://<local path>/paparazzi-portability-support/darwin/macports/ports/ [nosync] for example:

   file:///Users/dummyuser/projects/paparazzi/paparazzi-portability-support/darwin/macports/ports/ [nosync]

6. Install paparazzi

   sudo port install paparazzi

   # then go and have lunch, get a coffee, get some sleep. this will probably take a long time
7. edit /etc/profile and add export CPPFLAGS="-I/opt/local/include" (TODO: Remove the need for this)

If you want to follow the standard Paparazzi Git install then the prerequisite software can be installed by running the command

sudo port install paparazzi-tools

Installation using the binary installer

1. Install the latest XCode http://developer.apple.com/technologies/tools/xcode.html
2. Download the paparazzi binary installer from http://TODO find a place to host this file
3. Install paparazzi by double clicking on the downloaded file paparazzi.mpkg
4. edit /etc/profile and add export CPPFLAGS="-I/opt/local/include" (TODO: Remove the need for this)

If you want to follow the standard Paparazzi Git install then the prerequisite software can be installed by downloading the paparazzi-tools binary installer from http://TODO find a place to host this file and installing the tools by doublclicking on the downloaded file paparazzi-tools.mpkg

Configuration

edit paparazzi/conf/control_panel.xml and set the ivy_bus variable to be <your IP Network>:2010

Running Paparazzi

Paparazzi can be started in the usual way

cd ~/paparazzi
./paparazzi

When launching the GCS the ivy bus network needs to be specified.

1. Close all processes using the stop button
2. add -b <network>.255 to each command
3. start the processes again

Changing the gtk look and feel

Run /opt/local/bin/switch2 to select a different theme. More detailed instructions can be found at http://gtk.php.net/manual/en/html/tutorials/tutorials.installation.macosx-stepbystep.html

Additional themes can be downloaded from http://art.gnome.org/themes/gtk2

FTDI Drivers

FTDI drivers can be downloaded from FTDI