Difference between revisions of "Tiny GPS config"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Prerequisites: | Prerequisites: | ||
<ol> | <ol> | ||
<li>Must have loaded USB Boot Loader software | <li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/USB_Boot_Loader USB Boot Loader] software | ||
<li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"] | <li>Must have loaded [http://paparazzi.enac.fr/wiki/index.php/Tunnel "tunnel"] | ||
<li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center] | <li>Must have downloaded and installed [http://www.u-blox.com/customersupport/download/uCenterSetup.zip u-center] | ||
Revision as of 18:42, 20 April 2008
Prerequisites:
- Must have loaded USB Boot Loader software
- Must have loaded "tunnel"
- Must have downloaded and installed u-center
- Must have downloaded, uncompressed the LEA-4P config file
Required Cables:
- FTDI Serial Adapter Cable
- 8-pin Molex Picoblade connector to 6-pin FTDI cable
Steps:
- Connect FTDI cable + 8-pin Molex adapter to USB on your laptop
- Connect 8-pin Molex to "serial1" on Tiny2.11
- Power on Tiny2.11
- Start u-center application
- set connection speed to 9600BPS (LEA-4P factory default)
- Menu: Tools/GPS Config select the file to upload (LEA-4P file downloaded)
- Click File >> GPS button to send the file to the GPS
- About 2/3 the way through it will stop. At this point change 'baudrate' to 38,4000 connection and it will continue and finish