Difference between revisions of "Twog v1"
Jump to navigation
Jump to search
| Line 46: | Line 46: | ||
== Schematic == | == Schematic == | ||
[[Image:Twog_v1-00_schematic.png|left|900px|Twog v1.00 Schematic]]<br> | [[Image:Twog_v1-00_schematic.png|left|900px|Twog v1.00 Schematic]] | ||
<br style="clear:both"> | |||
== PCB == | == PCB == | ||
Revision as of 10:06, 3 April 2008
!! WARNING !!
THIS IS A PRELIMINARY DESIGN, IT HAS NOT BEEN TESTED YET.
DO NOT USE FOR MASS PRODUCTION AS LONG AS THIS MESSAGE REMAIN.
Hardware Revision History
| Version # | Release Date | Release Notes |
|---|---|---|
| v1.00 | 04/2008 | Initial release of Twog v1 |
Features
- Single LPC2148 MCU
- 8 x Analog input channels 0V - 3.3V (2 channels with optional on-board resistor bridge)
- 1 x 3.3V TTL UART (5V tolerant)
- 8 x PWM outputs
- 1 x R/C receiver PPM frame input
- 1 x SPI bus
- 1 x I2C bus
- 1 x USB (client)
- 5V/2.5A switching power supply & 3.3V/1A linear regulator
- 3 x status LEDs with attached test point
- ?? grams
- 40.2 x 30.5mm (1.6" x 1.2")
- 2 layers PCB design, 0603 components
Twog v1.00 3D top view
Twog v1.00 3D bottom view
Architecture
Pinout
Pins Name and Type are specified with respect to the Autopilot Board
Schematic
PCB
Twog v1.00 PCB top copper
Twog v1.00 PCB bottom copper
Gerber & Drill Files
Download Twog v1.00 gerber & drill files (zip)
RS274X, units = Inches, format = 2:5
- Twog_v1-00.GTO (Top Component Print Layer)
- Twog_v1-00.GTS (Top Solder Mask)
- Twog_v1-00.GTL (Top Copper Layer)
- Twog_v1-00.GBL (Bottom Copper Layer)
- Twog_v1-00.GBS (Bottom Solder Mask)
- Twog_v1-00.DRI (NC XY coordinates & Drill tools sizes)
Possible PCB Manufacturers
Assembly
Components Layout
Top components Layout
Bottom components Layout
Top components details
Bottom components details
Bill Of Material
Download Twog v1.00 Bill Of Material (zipped .xls file)
Downloads
Source files
Gerber & Drill files
Assembly files