Installation/Linux

Precompiled binaries can be downloaded and executed with the paparazzi-bin package but to maintain the power and flexibility of open-source code, most operations within Paparazzi involve recompilation of autopilot and/or ground station code. Therefore the typical installation requires all of the necessary C and OCaml compilers as well as some XML and Ivy handlers. These tools are provided by the paparazzi-dev package.

The Paparazzi sources are hosted by Savannah.

The Paparazzi packages are hosted at the ENAC repository.

Installation on Debian based distributions

Paparazzi is packaged for Debian as well as all of its dependencies. The repository hosted at ENAC holds their latest version.

Installation from the Command Line

Just add the following line to your repository list (/etc/apt/sources.list). Replace etch by sarge (oldstable distribution) or sid (unstable distribution) if needed. Note: It is no longer required to specify both sarge and etch.

File: /etc/apt/sources.list

deb http://paparazzi.enac.fr/debian etch main

Then, update your sources and install the precompiled binaries or the dependencies needed for recompiling from the source (dev), and the cross-compiler (arm7) :

apt-get update
apt-get install paparazzi-bin
apt-get install paparazzi-dev
apt-get install paparazzi-arm7

Note: It is not recommended to install both paparazzi-bin and paparazzi-dev. While the bin package is self-contained and should be sufficient for users who do not want to patch the code, the dev meta-package provides only the tools to compile the source code which must be separately downloaded, from an archive or the CVS repository.

Note: Installation works fine on the Ubuntu 7.10 distribution (using the etch distro).

Installation thru Synaptic Package Manager

• Launch Synaptic Package Manager (Applications/System Tools Menu)
• In Settings/Repositories, add a new repository on URI = http://paparazzi.enac.fr/debian, Distribution = etch (or sarge or sid), Section = main
• Search for paparazzi-bin, paparazzi-dev, and paparazzi-arm7 packages (use the Search button)
• Mark them for installation (right-click on package names)
• Left-click on Apply

Optional/Obsolete Packages

Users of older AVR based boards will also need the paparazzi-avr package.

Installing the Source Code

After the paparazzi-dev package is installed the complete source code should be downloaded from the CVS repository. See the project page at Savannah for more details. From the directory of your choice type:

cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/paparazzi co paparazzi3

This will download all of the code and install it into paparazzi3/

If you cannot use the CVS install, dayly updated tarballs can also be fetched from the Downloads page.

Extra for Ubuntu 7.04 and 7.10

The Braille TTY driver interferes with FTDI USB Serial adapters and should be removed:

sudo apt-get remove brltty

Launching the Software

If you are using the paparazzi-bin package or the Live-CD, just launch the paparazzi binary application and you will be guided through the installation of your personal configuration files.

If you are using the source code, before launching the GCS or compiling anything you must have the Paparazzi source and home environment variables set correctly in your shell. These variables can be automatically set in your shell by adding the following lines to your .bashrc file:

File: /home/your_username/.bashrc

export PAPARAZZI_HOME=your paparazzi3 directory export PAPARAZZI_SRC=your paparazzi3 directory

If you wish to manually set the env variables (i.e. when compiling a backup copy of your code in a different folder) execute the following command from the folder you wish to set as your active paparazzi folder:

export PAPARAZZI_HOME=`pwd`;export PAPARAZZI_SRC=`pwd`

Verify that your variables are set correctly with the following command:

env | grep PAPARAZZI

which should return the following:

PAPARAZZI_HOME=your paparazzi3 directory
PAPARAZZI_SRC=your paparazzi3 directory

Launch the software from your paparazzi3 directory with:

./paparazzi

Recompiling

After any CVS update or source code modification the code can be recompiled from your paparazzi3 directory with the following command:

make

The make command will only recompile portions of the software where changed have been detected. If it does not behave as expected you can deleted all compiled files and recompile from scratch with the following commands:

make clean
make

See the Compiling page for more info.

Manual Installation of Individual Packages

Users of Ubuntu or other Linux flavors or anyone needing manual control of each individual package can install them independently. The list of dependencies of the Debian package is located in the debian/control file and may help users of other distributions.

wget http://www.recherche.enac.fr/paparazzi/debian/dists/sarge/main/binary-i386/libsubject-perl_2.00_all.deb
wget http://www.recherche.enac.fr/paparazzi/debian/dists/etch/main/binary-i386/xml-light-ocaml_2.1-2_i386.deb
wget http://www.tls.cena.fr/products/ivy/download/packages/ivy-perl_4.21_all.deb
wget http://www.tls.cena.fr/products/ivy/download/packages/ivy-c_3.9.2-1_i386.deb
wget http://www.tls.cena.fr/products/ivy/download/packages/ivy-c-dev_3.9.2-1_i386.deb
wget http://www.recherche.enac.fr/paparazzi/debian/dists/etch/main/binary-i386/ivy-ocaml_1.1-2_i386.deb
wget http://www.recherche.enac.fr/paparazzi/debian/dists/etch/main/binary-i386/paparazzi-bin_3.1-2_i386.deb 
wget http://www.recherche.enac.fr/paparazzi/debian/dists/etch/main/binary-i386/paparazzi-dev_3.1-2_i386.deb
sudo dpkg -i libsubject-perl_2.00_all.deb
sudo dpkg -i xml-light-ocaml_2.1-2_i386.deb
sudo dpkg -i ivy-ocaml_1.1-2_i386.deb
sudo dpkg -i ivy-perl_4.21_all.deb
sudo apt-get install perl-tk
sudo apt-get -f install
sudo dpkg -i paparazzi-bin_3.1-2_i386.deb
sudo dpkg -i paparazzi-dev_3.1-2_i386.deb
mkdir -p $USER/paparazzi3/conf/
paparazzi

Then follow the source install installation instructions above with cvs and after building the cvs paparazzi execute the ./paparazzi in the cvs distribution to get paparazzi-center as above. Note: compiling and loading the AP will fail on ubuntu unless you have installed an arm-elf-gcc cross tool chain. NEW Paparazzi users who are also new to Debian, may prefer the Ubuntu distribution (based on Debian) as it allows an easier entry to paparazzi goodness then a "pure" debian distribution for the novice while allowing access to all of Debian's wizardry as you become more experienced.

Software Updates

Paparazzi is a very rapidly evolving project and as such, you will find that variables and functions are frequently added, changed, or removed. Update your software with care and caution, and always test the functionality on the ground and in the air as some updates will affect tuning parameters. Your airframe file will not be updated by the CVS system and therefore any new or modified variable names will need to be added manually. The compiler will usually identify the problem variables at which point you can look at some of the most recent airframe files on the CVS to find the proper syntax. See the Compiling page for more help if needed.
That said, keeping your software up to date is easy with the CVS system. The system will compare all source code files with the server and update any that are needed, automatically merging any minor changes that you have incorporated along the way.

To download and automatically merge any updated source files, run the following command from your Paparazzi directory

cvs update -d

where the -d is needed to get any new directories.

Users making changes to their code structure may prefer to have more control over the updating and merging process and may wish to install and use tkcvs instead which provides highlighted comparisons of any files that differ between your code and the CVS server and allows for a file by file update.

To update your Linux distribution as well as any dependencies of Paparazzi (seldom necessary), run the following as root:

apt-get update
apt get upgrade

LiveCd

The LiveCD is an easy way to test Paparazzi: no installation is required and no changes are made to your computer. Simply burn the image as a boot CD and reboot! The LiveCD includes Linux and the complete paparazzi binary package (code source, tools and cross compilers). It is intended for demonstration only and not frequently updated but it contains the complete system and can store changed files on a pen drive or compressed file on your hard drive so that it can compile, flash, and operate any aircraft, albeit slowly.

The CD image is available from the Downloads page.

The Paparazzi demo is launchable on the Live CD from the Paparazzi icon.

Knoppix allows for all the user data to be saved on a hard disk partition (most file systems are supported) or on a removable device (typically a USB pendrive). Note that this action is not destructive: the user data tree is compressed and stored on your file system as a single file (knoppix.img).

• From the Knoppix menu (second from bottom left), choose Configure, Create a persistent KNOPPIX disk image
• Choose your media (be sure to connect your USB pendrive before booting!)
• Choose if you want an encrypted filesystem (to protect your flight plan designed for the next MAV competition :-) )
• Choose the size of your home directory (100Mb is recommended)

On the next reboot, this saved state will be automatically located and loaded.

Using this persistent feature, the Paparazzix Live CD can really be used to configure, simulate and fly an aircraft with the Paparazzi system.

The Live CD can also be used to install a Debian system on the hard disk, using the knoppix-installer command. Be sure to backup the hard disk before trying ...