Elle0

Elle0 is a low cost STM32F4 based autopilot. It was developed by 1BitSquared specifically to work with the Paparazzi UAV framework.

Features

• STM32F4 168MHz ARM Cortex-M4 microcontroller with FPU
  • 1 Mbyte of Flash memory
  • 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
  • Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1), and HMAC
  • True random number generator
• 3 axis gyroscope (connected over SPI for high speed sampling and low latency)
• 3 axis accelerometer (connected over SPI for high speed sampling and low latency)
• 3 axis magnetometer (connected over SPI for high speed sampling and low latency)
• barometer (connected over dedicated SPI for low noise operation and low latency)
• 1 I2C auxilary sensor connection
• 2 TTL level serial ports for telemetry radio and GPS
• 2 serial input interfaces for remote control receivers (using Spektrum compatible JST connectors)
• 1 USB port for easy firmware upgrade
• 8 PWM outputs/inputs for servos or legacy PPM RC receivers
• 2 Analog inputs for system battery voltage and current measurement
• CAN TX and RX lines are accessible

Where to Buy

Elle0 is available for Pre-Order at the [1] store. It will be available early 2016.