Difference between revisions of "FunJet"

From PaparazziUAV
Jump to navigation Jump to search
 
(20 intermediate revisions by 8 users not shown)
Line 26: Line 26:
* Weight: 21oz (620g) _all up_
* Weight: 21oz (620g) _all up_
* Weight w/o powerplant (for estimation): 330g
* Weight w/o powerplant (for estimation): 330g
* Bare weight: 165g
* Length: 29.52" (750mm)
* Length: 29.52" (750mm)
* Airfoils: Airfoil: Semi-symmetrical, mid wing at the fuselage sides
* Airfoils: Airfoil: Semi-symmetrical, mid wing at the fuselage sides
Line 45: Line 46:
=== Group Member Setups ===
=== Group Member Setups ===


'''Martin'''
====Martin====


* Motor: AXI 2212/26
* Motor: AXI 2212/26
* Battery: 3S1P 2100mAh LiPo
* Battery: 3S1P 2100mAh LiPo
* Prop: 9x6
* Prop: 9x6
 
<br>
'''Matthew Currie'''
====Matthew Currie====
 
{|
{|
|[[Image:FJ_MC_ANGLE.jpg|thumb|left|Multiplex FunJet]]
|[[Image:FJ_MC_ANGLE.jpg|thumb|left|Multiplex FunJet]]
Line 64: Line 64:
* Receiver: Berg 4L
* Receiver: Berg 4L
* Servos: 2x Hitec HS-55
* Servos: 2x Hitec HS-55
<br>
====ENAC Team====
{|
|[[Image:Funjet_2_DigIR_049.jpg|thumb|left|ENAC Team special setup Multiplex FunJet]]
|[[Image:Funjet_2_DigIR_033.jpg|thumb|left|ENAC Team special setup Multiplex FunJet]]
|}
<br>


=== Servos ===
=== Servos ===
Line 98: Line 105:
* Max Amps: 30A
* Max Amps: 30A
* Max Watts: 275W
* Max Watts: 275W
'''AXI 2212/26'''
http://www.modelmotors.cz/index.php?page=61&product=2212&serie=26&line=GOLD
MSRP $69.95 USD
* Dimensions: 1-3/32" diameter, 1-3/16" case length, 3.17mm (1/8") shaft
* Weight: 57 g
* KV: 920
* Max Amps: 12A
* Max Watts: 275W
* Prop's:
9x6, 24.5 ounce thrust, 14:12 full throttle.
8x6, 19.5 ounce thrust, 19:38 full throttle.


== Funjet Back Plate Construction ==
== Funjet Back Plate Construction ==
Line 104: Line 126:
|}
|}


* A suitable precursor for the back plate is 5mmx75mmx75mm balsa sanwiched by 1mmx75mmx75mm plywood. The laminating adhesive used was PVA glue. The sandwich was left to dry overnight clamped by similar size wooden plates in a vice.
* A suitable precursor for the back plate is 5mmx75mmx75mm balsa sandwiched by 1mmx75mmx75mm plywood. The laminating adhesive used was PVA glue. The sandwich was left to dry overnight clamped by similar size wooden plates in a vice.


* An outline of The 7mm elapor profile, cut from the back of the Funjet canopy, is drawn in a CAD/CAM program.     
* An outline of The 7mm elapor profile, cut from the back of the Funjet canopy, is drawn in a CAD/CAM program.     
:*download ''[[Image:Funjet_Back_Plate_CADopia.pdf|Funjet back plate CADopia drawing (pdf)]]''
:*download ''[[Media:Funjet_Back_Plate_CADopia.pdf|Funjet back plate CADopia drawing (pdf)]]''


* A laser cutting firm transferred this outline to CorelDraw and cut an acrylic (Perspex) template.
* A laser cutting firm transferred this outline to CorelDraw and cut an acrylic (Perspex) template.
:*download ''[[Image:Funjet_Back_Plate_ CorelDraw .pdf|Funjet back plate CorelDraw drawing (pdf)]]''
:*download ''[[Media:Funjet_Back_Plate_CorelDraw .pdf|Funjet back plate CorelDraw drawing (pdf)]]''


* The balsa/plywood sandwich was attached by double sided tape to the acrylic template and the correct outline achieved by routing around the acrylic border.
* The balsa/plywood sandwich was attached by double sided tape to the acrylic template and the correct outline achieved by routing around the acrylic border.


{|
{|
|[[Image:Funjet_Back_Plate_Fitted.jpg|thumb|Funjet back plate fitted]]
|[[Image:Funjet_Back_Plate_Fitted.jpg|thumb|left|Funjet back plate fitted]]
|[[Image:Tiny_v2_1_Funjet.jpg|thumb|Tiny v2.1 in a Funjet]]
|[[Image:Tiny_v2_1_Funjet.jpg|thumb|left|Tiny v2.1 in a Funjet]]
|}
|}
* The fitted plate looks remarkably similar to that displayed in the image on the right found on the main page of the wiki.  
* The fitted plate looks remarkably similar to that displayed in the image on the right found on the main page of the wiki.


== Online Discussion on FunJet topics ==
== Online Discussion on FunJet topics ==
Line 139: Line 161:
* [http://www.recherche.enac.fr/paparazzi/wiki_images/FunJet_Manual_English.pdf Multiplex FunJet Instruction Manual - English]
* [http://www.recherche.enac.fr/paparazzi/wiki_images/FunJet_Manual_English.pdf Multiplex FunJet Instruction Manual - English]
* [http://www.recherche.enac.fr/paparazzi/wiki_images/FunJet_Manual_Multilanguage.pdf Multiplex FunJet Instruction Manual - Original Multilanguage]
* [http://www.recherche.enac.fr/paparazzi/wiki_images/FunJet_Manual_Multilanguage.pdf Multiplex FunJet Instruction Manual - Original Multilanguage]
* Painting Elapor should be primed [[http://www.phillsmodels.com/acatalog/index.html?http%3A//www.phillsmodels.com/acatalog/Online_Catalogue_Paint_882.html&CatalogBody primer]]
* Painting Elapor should be primed [http://www.phillsmodels.com/acatalog/index.html?http%3A//www.phillsmodels.com/acatalog/Online_Catalogue_Paint_882.html&CatalogBody primer]
* Fiberglass wing spar: 22.5" (571mm) x .25" (6.35mm)
* Motor Screws (to hold plastic motor plate to plastic motor cowl) are slot head and appear to be 3.0mm x 0.5mm (thread) x 16mm long
* Screws for AXI "outrunner" motor are 3.0mm Diameter x 0.5mm Thread x 6 mm Length


* Fiberglass wing spar: 22.5" (571mm) x .25" (6.35mm)
[[Category:Airframes]]

Latest revision as of 18:06, 9 March 2011

<< Back to Airframes


Multiplex FunJet

The MultiPlex FunJet is an electric pusher-prop jet made of very durable Elapor Particle Foam Construction. It offers plenty of room internally for avionics in an attractive package.

Features

  • Suggested Retail Price of $65 USD
  • Elapor Particle Foam construction
  • Assembles in minutes with only Medium CA glue
  • Fiberglass Wing Spar
  • Moderately priced
  • Detachable canopy for access to internals
  • Plastic Motor Mount
  • Wide flight speed envelope (slow without stalling, through fast)

Specifications

  • Wingspan: 31.29" (795mm)
  • Wing Area: 232 sq in (15 sq dm)
  • Weight: 21oz (620g) _all up_
  • Weight w/o powerplant (for estimation): 330g
  • Bare weight: 165g
  • Length: 29.52" (750mm)
  • Airfoils: Airfoil: Semi-symmetrical, mid wing at the fuselage sides

Payload Area

  • Fuselage is 1.60" (40.6mm) wide x 20" long

Recommended Setups

Manufacturer Recommendation

Remember this is a hot sport plane so the manufacturers recommendation reflects typical desired performance and may not be the best match for UAV operations.

  • Motor: Himax HB2815-3000 Brushless Motor
  • Battery: 3S1P 2100-3200mah LiPo
  • Servos: 2 Nano sized (HS-55)

Group Member Setups

Martin

  • Motor: AXI 2212/26
  • Battery: 3S1P 2100mAh LiPo
  • Prop: 9x6


Matthew Currie

Multiplex FunJet
Multiplex FunJet
Multiplex FunJet
  • Motor: AXI 2212/26
  • Battery: LiPower Lites 3S1P 2100mAh 18C LiPo
  • Prop: APC 9x6E (checked to draw ~ 11.5A)
  • Receiver: Berg 4L
  • Servos: 2x Hitec HS-55


ENAC Team

ENAC Team special setup Multiplex FunJet
ENAC Team special setup Multiplex FunJet


Servos

Multiplex calls for 2 Hitec HS-55 or 2 HS-65 servos

Hitec HS-55

  • MSRP: $13 USD
  • Torque: 13/16 oz/in @ 4.8/6.0v
  • Speed: 0.09/0.08 seconds/ 60deg @ 4.8/6.0v
  • Weight: 0.29 oz (7.8g)
  • Size: 0.9 x 0.46 x 0.95"

Hitec HS-65HB

  • MSRP:
  • Motor Type: 3 Pole Ferrite
  • Bearing Type: Top Ball Bearing
  • Torque 4.8/6.0v: 22 / 26 oz (1.6 / 1.9 kg.)
  • Speed 4.8/6.0v: 0.16 / 0.13 second
  • Size: 0.9"x 0.5"x 0.9" (24 x 12 x 24m)
  • Weigh : 0.39oz. 11.2 g.

Recommended Motors

Himax HB2815-3000 Brushless Motor

PDF Datasheet

  • MSRP $69.95 USD
  • Dimensions: 27mm x 38mm
  • Weight: 86g
  • KV: 3000
  • Max Amps: 30A
  • Max Watts: 275W

AXI 2212/26

http://www.modelmotors.cz/index.php?page=61&product=2212&serie=26&line=GOLD

MSRP $69.95 USD

  • Dimensions: 1-3/32" diameter, 1-3/16" case length, 3.17mm (1/8") shaft
  • Weight: 57 g
  • KV: 920
  • Max Amps: 12A
  • Max Watts: 275W
  • Prop's:

9x6, 24.5 ounce thrust, 14:12 full throttle.

8x6, 19.5 ounce thrust, 19:38 full throttle.

Funjet Back Plate Construction

Funjet back plate construction components
  • A suitable precursor for the back plate is 5mmx75mmx75mm balsa sandwiched by 1mmx75mmx75mm plywood. The laminating adhesive used was PVA glue. The sandwich was left to dry overnight clamped by similar size wooden plates in a vice.
  • An outline of The 7mm elapor profile, cut from the back of the Funjet canopy, is drawn in a CAD/CAM program.
  • A laser cutting firm transferred this outline to CorelDraw and cut an acrylic (Perspex) template.
  • The balsa/plywood sandwich was attached by double sided tape to the acrylic template and the correct outline achieved by routing around the acrylic border.
Funjet back plate fitted
Tiny v2.1 in a Funjet
  • The fitted plate looks remarkably similar to that displayed in the image on the right found on the main page of the wiki.

Online Discussion on FunJet topics

Photos

Included Motor Mount
Example of high visibility paint job
Idea for wing tip skid

Misc Notes

Retrieved from "http://wiki.paparazziuav.org/w/index.php?title=FunJet&oldid=8967"