Difference between revisions of "User:Bu5hm4nn"
Jump to navigation
Jump to search
(Started my own talk page) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
== Myself == | == Myself == | ||
* Electronic | * Electronic Engineer | ||
* I live in Germany | * I live in Germany | ||
* I started with model airplanes in March 2008 after seeing the Paparazzi demonstration at 24C3 | * I started with model airplanes in March 2008 after seeing the Paparazzi demonstration at 24C3 | ||
| Line 10: | Line 10: | ||
== My Hardware == | == My Hardware == | ||
===Multiplex EasyGlider Pro | ===Airframe=== | ||
<strong>Multiplex [http://www.multiplex-rc.de/hp/produkte/index.jsp?node=xx0106# EasyGlider Pro]</strong> | |||
* With their recommended 150 W brushless kit | * With their recommended 150 W brushless kit | ||
* I get around 30 mins of flight out of a 2100 mAh 2S LiPo | * I get around 30 mins of flight out of a 2100 mAh 2S LiPo | ||
===Graupner/JR MX-12 | ===RC-Controller=== | ||
* Seemed to offer most features for money (140 euros) | <strong>Graupner/JR MX-12</strong> | ||
* came with R700 reciever (nice) | * Seemed to offer most features for money (140 euros) in 2008 (now obsolete). | ||
* came with [http://www.mikrokopter.de/ucwiki/R700 R700] reciever (nice) | |||
===Paparazzi=== | |||
<strong>Tiny v2.11</strong> | |||
* w. GPS LEA 4P | |||
===HF-Modem=== | |||
<strong>Digi.com XBee-Pro ZB Zigbee S2B</strong> | |||
==My Progress== | |||
Well I bought the Hardware in 2008 but due to limited free time I didn't accomplish more than to solder up the Tiny. In May 2010 I had some spare time due to changes in my work-life and tried to make some new progress with Paparazzi. | |||
===18. June 2010=== | |||
* I can not get the LPC to start up. As I don't have access to an Oscilloscope at the moment, I can not verify if the quarz is functioning correctly. | |||
* Toasted the PTH08080 by directly inserting 5V ... should have read the manual first ... | |||
* Removed the PTH08080 and am now directly supplying the 5V | |||
* The GPS works fine, if I connect directly to it. | |||
* Still no reaction from the LPC, tried using FlashMagic with no success | |||
Latest revision as of 01:30, 18 June 2010
Myself
- Electronic Engineer
- I live in Germany
- I started with model airplanes in March 2008 after seeing the Paparazzi demonstration at 24C3
- My Vision for Paparazzi
- Building autonomous Airframes with long range and long endurance!
My Hardware
Airframe
Multiplex EasyGlider Pro
- With their recommended 150 W brushless kit
- I get around 30 mins of flight out of a 2100 mAh 2S LiPo
RC-Controller
Graupner/JR MX-12
- Seemed to offer most features for money (140 euros) in 2008 (now obsolete).
- came with R700 reciever (nice)
Paparazzi
Tiny v2.11
- w. GPS LEA 4P
HF-Modem
Digi.com XBee-Pro ZB Zigbee S2B
My Progress
Well I bought the Hardware in 2008 but due to limited free time I didn't accomplish more than to solder up the Tiny. In May 2010 I had some spare time due to changes in my work-life and tried to make some new progress with Paparazzi.
18. June 2010
- I can not get the LPC to start up. As I don't have access to an Oscilloscope at the moment, I can not verify if the quarz is functioning correctly.
- Toasted the PTH08080 by directly inserting 5V ... should have read the manual first ...
- Removed the PTH08080 and am now directly supplying the 5V
- The GPS works fine, if I connect directly to it.
- Still no reaction from the LPC, tried using FlashMagic with no success