Difference between revisions of "Lisa USB"
(→Host) |
|||
Line 9: | Line 9: | ||
mass storage stick - works , read: 68Mbps write: 6.6Mbps | mass storage stick - works , read: 68Mbps write: 6.6Mbps | ||
=== | === OTG direct === | ||
edimax wifi - non-functional rt3070 driver doesn't create an ra0 | edimax wifi - non-functional rt3070 driver doesn't create an ra0 | ||
apparently it's because there's not enough power: | |||
<pre> | |||
usb 1-1: new high speed USB device using musb_hdrc and address 2 | |||
usb 1-1: default language 0x0409 | |||
usb 1-1: udev 2, busnum 1, minor = 1 | |||
usb 1-1: New USB device found, idVendor=7392, idProduct=7711 | |||
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |||
usb 1-1: Product: 802.11 n WLAN | |||
usb 1-1: Manufacturer: Ralink | |||
usb 1-1: SerialNumber: 1.0 | |||
usb 1-1: usb_probe_device | |||
usb 1-1: rejected 1 configuration due to insufficient available bus power | |||
</pre> | |||
mass storage stick - works , read: 66Mbps write: 6.8Mbps | mass storage stick - works , read: 66Mbps write: 6.8Mbps | ||
Revision as of 10:37, 26 August 2010
List of tested devices
TODO: Put all of this in a nice pretty table
Overo version, Lisa version, Interface, USB device ID, Driver, Driver Ver, Kernel Ver, Issues, Performance, Notes
OTH with Hub
edimax wifi - functional, netperf shows 13Mbps throughput to a PC also on wifi mass storage stick - works , read: 68Mbps write: 6.6Mbps
OTG direct
edimax wifi - non-functional rt3070 driver doesn't create an ra0 apparently it's because there's not enough power:
usb 1-1: new high speed USB device using musb_hdrc and address 2 usb 1-1: default language 0x0409 usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=7392, idProduct=7711 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: 802.11 n WLAN usb 1-1: Manufacturer: Ralink usb 1-1: SerialNumber: 1.0 usb 1-1: usb_probe_device usb 1-1: rejected 1 configuration due to insufficient available bus power
mass storage stick - works , read: 66Mbps write: 6.8Mbps
Host
edimax wifi - functional, netperf shows 11Mbps throughput to a PC also on wifi mass storage stick FireFly - works , read: 130Mbps write: 6.8Mbps
Notes
Lisa v1.0-r1 Overo old one kernel 2.6.33.5-rt23 driver rt3070sta idVendor=7392, idProduct=7711
Bus 001 Device 003: ID 05dc:a701 Lexar Media, Inc. JumpDrive FireFly RevF 4GB (FAT formatted)
file transfer performance test method
- write: dd if=/dev/urandom of=/mnt/filename bs=8192 count=1k
- read: cat /mnt/filename > /dev/null