Difference between revisions of "FlightGear"
m |
|||
| Line 24: | Line 24: | ||
sudo apt-get update | sudo apt-get update | ||
sudo apt-get install flightgear | sudo apt-get install flightgear | ||
== Adding Paparazzi models == | |||
There are a few new models that come with paparazzi: | |||
* ''mikrokopter.xml'' quadrotor frame | |||
* ''hexa.xml'' hexacopter | |||
* ''simple_bipe.xml'' biplane/quadrotor hybrid (transitioning vehicle) | |||
To make them available in flightgear, make a link from ''/usr/share/games/flightgear/Models/Aircraft/paparazzi'' to ''<paparazzi_dir>/conf/simulator/flightgear/'' | |||
sudo ln -s $PAPARAZZI_SRC/conf/simulator/flightgear/ /usr/share/games/flightgear/Models/Aircraft/paparazzi | |||
== Using FlightGear for Visualization == | == Using FlightGear for Visualization == | ||
| Line 36: | Line 45: | ||
</source> | </source> | ||
}} | }} | ||
* Launch Flight Gear with the following command: | * Launch Flight Gear with the following command: | ||
Revision as of 07:54, 24 January 2013
FlightGear Flight Simulator.
See http://www.flightgear.org/
Installation
Debian/Ubuntu
The standard Debian/Ubuntu repositories contain FlightGear 2.4 or 2.6.
Flightgear 2.8 was available from getdeb.net (now discontinued, you can still use the mirrors). In this example for Ubuntu 12.04 precise, replace the codename as appropriate:
Add the key:
wget -q -O - http://mirrors.dotsrc.org/getdeb/ubuntu/dists/precise-getdeb/Release.gpg | sudo apt-key add -
Add to your /etc/apt.sources.list:
deb http://mirrors.dotsrc.org/getdeb/ubuntu precise-getdeb games deb-src http://mirrors.dotsrc.org/getdeb/ubuntu precise-getdeb games
Install flightgear:
sudo apt-get update sudo apt-get install flightgear
Adding Paparazzi models
There are a few new models that come with paparazzi:
- mikrokopter.xml quadrotor frame
- hexa.xml hexacopter
- simple_bipe.xml biplane/quadrotor hybrid (transitioning vehicle)
To make them available in flightgear, make a link from /usr/share/games/flightgear/Models/Aircraft/paparazzi to <paparazzi_dir>/conf/simulator/flightgear/
sudo ln -s $PAPARAZZI_SRC/conf/simulator/flightgear/ /usr/share/games/flightgear/Models/Aircraft/paparazzi
Using FlightGear for Visualization
For Flight Gear visualization of the simulation, version 2.6 or greater is best. If you wish to use version 2.4 or lower, you must add the following to the firmware section of your airframe file:
| File: conf/airframes/myplane.xml |
<firmware name="fixedwing or rotorcraft">
...
<define name="FG_2_4" value="1"/>
...
</firmware>
|
- Launch Flight Gear with the following command:
fgfs --fdm=null --native-gui=socket,in,30,,5501,udp
or to e.g. use the mikrokopter quadrotor model:
fgfs --fdm=null --native-gui=socket,in,30,,5501,udp --prop:/sim/model/path=Models/Aircraft/paparazzi/mikrokopter.xml