TU Delft - Search and Rescue with AR Drone 2
Team 1 Objective
We, team 1, will work with the raw navigation data, creating our own drivers to retrieve and interpret the sensor data. We will need to describe a new board configuration for Paparazzi to work with.
Creating a Flight Dynamics Model
In order to control the otherwise highly active dynamic nature of the quadrotor, an autopilot system will be necessary because the reaction time of the pilot will, otherwise, not be sufficient to maintain stable flight. The autopilot system will be created in Paparazzi for which a prerequisite is a proper flight dynamics model (FDM). To create the FDM the team will use JSBSIM, an open-source, platform-independent, flight-dynamics and control software library. Installing JSBSIM is covered for several different operating systems on the Paparazzi Wiki, Installing JSBSIM.
Paparazzi Autopilot System
Throughout this project, on several different occasions, it will be apparent that the AR.Drone was never meant to be used in this fashion. In addition to this, Parrot SA has a vested interest in maintaining the exclusivity of its product, rightfully so. With what little information is publicly available it is the team's objective to load the open-source autopilot system, Paparazzi onto an otherwise copyright protected piece of hardware. In order to do so a few steps had to be taken to get Paparazzi onto the AR.Drone 2.