Difference between revisions of "Setting up a build environment for overo-oe"
Line 2: | Line 2: | ||
http://www.gumstix.net/Documentation/view/Overo-Setup-and-Programming/Setting-up-a-build-environment/109.html | http://www.gumstix.net/Documentation/view/Overo-Setup-and-Programming/Setting-up-a-build-environment/109.html | ||
(you need a lot of space to reduce the amount of space needed insert | |||
INHERIT += "rm_work" | |||
to overo-oe/build/conf/local.conf) | |||
when you are at the command: | when you are at the command: |
Revision as of 06:06, 19 June 2010
follow the instructions on his page:
(you need a lot of space to reduce the amount of space needed insert
INHERIT += "rm_work"
to overo-oe/build/conf/local.conf)
when you are at the command:
$ bitbake omap3-console-image (when you are in a virtual box environment it will take long 12 hours at least)
and build it on Ubuntu 10.04 LTS - the Lucid Lynx - release you will get this error:
ERROR: ....expat_2.0.1.bb do_unpack failed
2 solution to this error:
http://old.nabble.com/Development-Machine-Build-Environment-Setup---Help!-td28539560.html
or
http://www.facebook.com/note.php?note_id=398968379361
follow instructions of ERROR#1
patching the kernel for spidev
You can follow the instructions on gumstix's website to build a complete cross development environment. Paparazzi's Makefile will default to look for it in /overo-oe
Work is in progress to offer a pre-compiled cross compilation toolchain.
For the moment compiling omap-console-image will generate the cross compiler and libs you need. You also need to compile libevent which is not compiled by omap-console-image ( bitbake build libevent )
-patching the kernel for spidev look where kernel comes from in /overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.32.bb
git clone git://www.sakoman.com/git/linux-omap-2.6.git
git checkout d434b954906c4f3e356d64d6b49675c601456f51
git diff > /overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-2.6.32/overo/add-spidev-for-mcspi1.patch
remove ads and lgphillips from /overo-oe/org.openembedded.dev/recipes/linux/linux-omap3/overo/defconfig really in /overo-oe/org.openembedded.dev/recipes/linux/linux-omap3-2.6.32/overo/ edit /overo-oe/org.openembedded.dev/recipes/linux/linux-omap3_2.6.32.bb SRC_URI_append = " \ file://${BOOT_SPLASH} \ file://add-spidev-for-mcspi1.patch;patch=1 \ "
bitbake -c clean linux-omap3 bitbake -c configure linux-omap3 bitbake -c rebuild linux-omap3
the defconfig I changed is in /overo-oe/tmp/work/overo-angstrom-linux-gnueabi/linux-omap3-2.6.32-r51/