Difference between revisions of "LisaOveroImage"

From PaparazziUAV
Jump to: navigation, search
(fix typo in config copy instruction)
Line 23: Line 23:
 
* Copy build profile into ~/overo-oe, source it:
 
* Copy build profile into ~/overo-oe, source it:
  
  cp org.openembedded.org/contrib/jei/build .
+
  cp org.openembedded.dev/contrib/jei/build .
 
  source ~/overo-oe/build/profile
 
  source ~/overo-oe/build/profile
  
 
* Use bitbake to build the image:
 
* Use bitbake to build the image:
 
  bitbake omap3-lisa-image
 
  bitbake omap3-lisa-image

Revision as of 14:50, 8 July 2010

Building an Overo image for Lisa with Open Embedded

The goal is to use openmbedded to build an image for the overo with the bits needed for Lisa. Currently this includes

  1. libevent
  2. linux kernel 2.6.33.5-rt23 (maintained at git://gitorious.org/linux-omap3/linux-omap3.git)
    1. based on gumstix-oe from (git://www.sakoman.com/git/linux-omap-2.6.git)
    2. antoine's patch for spi device node on overo
    3. 2.6.33.5-rt23 preempt-rt patch
  • Make sure you have bitbake and build-essential installed:
apt-get install bitbake build-essential
  • Make an overo-oe directory in your home directory, cd into it:
mkdir ~/overo-oe
cd ~/overo-oe
  • Clone Allen's openmebedded tree:
git clone git://gitorious.org/linux-omap3/openembedded.git org.openembedded.dev

(If you want to take a look at the repository beforehand you can find it Here)

  • Copy build profile into ~/overo-oe, source it:
cp org.openembedded.dev/contrib/jei/build .
source ~/overo-oe/build/profile
  • Use bitbake to build the image:
bitbake omap3-lisa-image