Difference between revisions of "Infrared Double Wide Sensor Board"
Jump to navigation
Jump to search
| Line 37: | Line 37: | ||
=== Gerber & Drill Files === | === Gerber & Drill Files === | ||
download ''[[Media:Gerber_for_IR_double_wide.zip|IR double wide sensor board gerber & drill files (zip)]]'' | |||
RS274X, units = Inches, format = 2:5 | |||
:*Tiny_v2-11.GTO (Top Component Print Layer) | |||
:*Tiny_v2-11.GTS (Top Solder Mask) | |||
:*Tiny_v2-11.GTL (Top Copper Layer) | |||
:*Tiny_v2-11.GBL (Bottom Copper Layer) | |||
:*Tiny_v2-11.GBS (Bottom Solder Mask) | |||
:*Tiny_v2-11.DRI (NC XY coordinates & Drill tools sizes) | |||
=== Possible PCB Manufacturers === | === Possible PCB Manufacturers === | ||
Revision as of 11:23, 31 March 2008
Overview
Pinout
Pinout
| Pin # | Name | Type | Description | Suggested Color |
|---|---|---|---|---|
| 1 | IR2 | OUT | IR Signal Axis 2 | Grey |
| 2 | GND | PWR | Ground | Black |
| 3 | VCC | PWR | +3.3v Power Supply | Red |
| 4 | IR1 | OUT | IR Signal Axis 1 | Braun |
Schematic
PCB
Top copper side
Bottom copper side
Top components details
Gerber & Drill Files
download IR double wide sensor board gerber & drill files (zip)
RS274X, units = Inches, format = 2:5
- Tiny_v2-11.GTO (Top Component Print Layer)
- Tiny_v2-11.GTS (Top Solder Mask)
- Tiny_v2-11.GTL (Top Copper Layer)
- Tiny_v2-11.GBL (Bottom Copper Layer)
- Tiny_v2-11.GBS (Bottom Solder Mask)
- Tiny_v2-11.DRI (NC XY coordinates & Drill tools sizes)
Possible PCB Manufacturers
Assembly
Components Layout
Top components Layout
Top components Layout (zoom)
Top components details
Bill Of Material
under construction
Downloads
Source files
Gerber & Drill files
Assembly files