Get Hardware
As an open-source project, all source code and hardware plans are freely available on the CVS Server for anyone to produce, use, modify, and redistribute in accordance with the GPL License Agreement which requires only that the open-source nature of the project be maintained by all who redistribute it.
We encourage the distribution of hardware for profit or otherwise and invite any users with paparazzi-related hardware to post links and purchasing information on this page. Please use the Discussion Tab to describe your experiences with any of these vendors.
PPZUAV Get it now without issues.
Our Items
- Tiny2.11 Autopilot $220.00
- TWOG Autopilot $125.00
- Paparazzi design external GPS units $120.00
- RF modems
Confused what to buy? We have bundles (Tiny2.11 Bundle and TWOG bundle) to make it easier for you to get what you need quickly.
We know it's hard to decide what to get, what you need to do etc. so we do quite a bit to help ensure when your parts arrive they are pre-programmed and include cables you'll need. These steps include:
- We load the bootloader
- configure the GPS module (LEA-5H Tiny2.11 we also update the GPS Firmware to the latest from u-blox)
- We load a sample tiny2.11 program into it.
- We verify it runs the program (LED1/RED flashes)
- Then acquires a 3D fix (LED2/GREEN flashes).
- For TWOG orders we load the USB Boot Loader for you before shipping.
- For Paparazzi GPS orders we update the u-blox firmware and load the Paparazzi GPS configuration file AND include the cable to connect it to the TWOG
Our goal is for you to focus on learning paparazzi not trying to determine if your autopilot is working. This means you can use the USB programming cable (included) and load your aircraft configuration as soon as you receive your Autopilot.
Please eMail sales@ppzuav.com with any questions or special requests before you place your orders. We return emails as quickly as possible. If it's an easy question within hours. More complex or longer explanation requests may take some time to read then write your answer so be patient.
Visit the PPZUAV WebStore to see the latest offerings.
Important Information about PPZUAV_SHIPPING
CheBuzz Paparazzi
CheBuzz Paparazzi is proud to become the first reseller of Paparazzi equipment in the EU. That means faster shipping, no packages getting stuck in customs, and no having to pay import duties! All of the equipment is hand-built for the moment, so all equipment is thoroughly tested. Your equipment is guaranteed to work upon arrival.
My Current Offerings:
- Tiny 2.11 assembled with LEA-5H and GPS antenna: $225
- Horizontal IR sensor: $60
- Vertical IR sensor: $40
- Picoblade to servo adapter: $2.50 each
- Tiny 2.11 PCB: $5
- Small Horizontal IR Sensor PCB: $3
- Slim Vertical IR Sensor PCB: $3
- U-blox LEA-5H GPS module: $60
- MLX90247 IR sensors: $10
My website is not yet up, but should be shortly. Until that time, please contact me at chebuzz@gmail.com
Orders will be shipped within 2 days of receiving payment. I will gladly accept payment in euros.
Mantis Electronics
Mantis Electronics is pleased to offer assembled Tiny 2.11, IR boards, GPS modules, USB-TTL interface boards, 3-Axis I2C/SPI accelerometer boards, and accessories for immediate order. Our boards are solder paste stencilled, reflow soldered and 100% tested.
Our Items:
- Tiny 2.11 assembled with LEA-4P and GPS antenna: $250 ($260 with Molex Picoblade connectors)
- 2-Axis IR board with IR sensors: $75
- 1-Axis IR board with IR sensors: $55
- u-blox LEA-4P GPS module: $75
- USB<->TTL Serial board: $15 (useful for programming and telemetry)
- 3-Axis I2C/SPI accelerometer board: $35
- MLX90247 IR sensors: $12
- Tiny 2.11 bare PCB: $10
- 2-Axis IR bare PCB: $5
- 1-Axis IR bare PCB: $5
Current lead time for orders is 3 weeks. USA shipping is $6. International shipping is $15.
Please see our website http://mantiselec.com/paparazzi.html to order.
CheBuzz Paparazzi
CheBuzz Paparazzi is proud to become the first reseller of Paparazzi equipment in the EU. That means faster shipping, no packages getting stuck in customs, and no having to pay import duties! All of the equipment is hand-built for the moment, so all equipment is thoroughly tested. Your equipment is guaranteed to work upon arrival.
My Current Offerings:
- Tiny 2.11 assembled with LEA-5H and GPS antenna: $225
- Horizontal IR sensor: $60
- Vertical IR sensor: $40
- Picoblade to servo adapter: $2.50 each
- Tiny 2.11 PCB: $5
- Small Horizontal IR Sensor PCB: $3
- Slim Vertical IR Sensor PCB: $3
- U-blox LEA-5H GPS module: $60
- MLX90247 IR sensors: $10
My website is not yet up, but should be shortly. Until that time, please contact me at chebuzz@gmail.com
Orders will be shipped within 2 days of receiving payment. I will gladly accept payment in euros.
Olimex
Fast PCB Prototypes www.olimex.com/pcb
FMA Direct
FMA is a good source of low cost IR sensors.
Sparkfun
Sparkfun is a great source of miscelaneous electronics like:
- Gyros
- Accelerometers
- Pressure sensors
- Ultrasonic distance sensors
- Temperature/humidity sensors
- USB to Serial converters
- LEDs
- Etc.